0
you buy a new set either from eBay or your dealer or you can remove your tired ones and have them regassed its as good as new,,just remmber one thing when you remove them remove them from the bols that hold them to the body and the hood,do not pry them off the brackets good luck
What else can I help you with?
Can 2000 Lexus es300 bumper fit 1997?
A 2000 Lexus ES300 bumper is not a direct fit for a 1997 Lexus ES300 due to changes in design and dimensions between the two model years. While there may be some similarities, the mounting points and overall shape may differ. To ensure compatibility, it's best to consult with a professional or check specific part compatibility guides.
How much does it cost to fix o2 sensor of Lexus es300 year 1997?
It just cost me $220.00
Where is the starter located on a 1997 Lexus es300?
The starter for this model is located on the driver's side, at the front of the engine.
How do you replace radio on 1997 Lexus es300?
To replace the radio in a 1997 Lexus ES300, start by carefully prying off the trim panel surrounding the radio using a flat tool to avoid damage. Remove the screws securing the radio and disconnect the wiring harness and antenna cable. Install the new radio by connecting the wiring harness and antenna, securing it with screws, and then reattach the trim panel. Ensure everything is properly connected and test the new radio before finalizing the installation.
How many miles do you have to drive to reset for an emission test on a 1997 Lexus Es300?
150 you would be safe, could be as little as 75
What hood fits your 99 Lexus es300?
For a 1999 Lexus ES300, the hood from the same model year (1999) is the best fit. Additionally, hoods from the 1997 and 1998 ES300 models may also be compatible, as they share similar body designs. Always verify part numbers or consult with an auto parts specialist to ensure proper fitment.
How do you replace the trunk light on a 1997 Lexus ES300?
I recently had to replace the trunk light in my '97 ES300. If you just need the bulb, it's NOT replacement #194 that Walmart, Advanced Auto and others list. You need a 12V, 3 Watt bulb that looks like a fuse. I finally had to buy mine from our local Lexus dealer. Pop open the light cover with a screwdriver and carefully pull out the bulb. Try this first because it's probably only the bulb that is bad.
How to replace a power steering belt on a Lexus es300?
I have a 1997 ES 300 Lexus and my belt that controls the power steering when out, what is the name of that belt (and I thought I would just replace the other one as well, as they have 2) and the bigger belt so I can get pricing? If I take it to a mechanic what is a reasonable price for the labor and parts together and separately? Thank you kindly for whoever answers
Can anyone provide me a wiring diagram for 1997 ES300. My license plate light is out and it is not the bulb or the fuse?
You can get your answer here......this site has a Lexus manual with the wiring diagrams in it. You will have to be patient. This manual has 582 pages. You will have to search for it. www.scribd.com/doc/19395068/1997-Lexus-ES-300-FSM-Section-14a-Diagnostics
1997 Lexus es300 your lowbeams are not working The bulbs are good Any suggestions If its the fuse which one?
I'd be suspicious of the dimmer switch or a wiring connector between the dimmer switch and the headlights.
What is normal mileage for a 1997 es300 Lexus?
Normal mileage for a 1997 Lexus ES300 typically ranges between 150,000 to 250,000 miles, depending on factors like maintenance, driving conditions, and usage. Cars that have been well-maintained may exceed this range, while others may have lower mileage but show signs of wear. It's essential to consider the vehicle's service history and overall condition rather than just mileage alone.
Where is fuse located for power mirrors 97 Lexus es300?
In a 1997 Lexus ES300, the fuse for the power mirrors is located in the engine compartment fuse box. You can find this box near the battery. Look for the fuse labeled "MIR" or "Power Mirror" in the diagram on the cover of the fuse box to identify the correct fuse. If the fuse is blown, replacing it should restore functionality to the power mirrors.
