You must replace entire assembly. If your problem is just foggy lenses, you can get lens cleaning solution at auto parts store.
how to replace the headlight
Take a hammer. smash the headlight assy. lens. Remove old bulb, put in new.
To replace a broken headlight lens in a 2003 Eurovan, start by removing the headlight assembly. Open the hood and locate the screws or clips securing the headlight, then carefully detach the assembly. Replace the broken lens with a new one, ensuring it fits securely, and reattach the headlight assembly with the screws or clips. Finally, test the headlight to ensure proper functionality.
If you're talking about the headlight, the "lens cover" is not a separate part, you need to replace the whole headlight assembly.
I assume you mean HEADLIGHT LENS.. .. there are 3 bolts on the back, remove, pull out headlight. Remove clips and broken lens. Replace gasket, lens and put on clips FRONT TO BACK so you don't chip the lens. Reinstall with 3 bolts on back.
To replace a headlight lens on a 2004 Volvo S80, start by opening the hood and removing the screws or bolts securing the headlight assembly. Carefully detach the assembly from the vehicle and disconnect the wiring harness. Replace the lens by either removing the old lens and securing the new one, or replacing the entire headlight assembly if needed. Finally, reconnect the wiring harness, reattach the assembly, and secure it with screws or bolts.
The headlight is a complete assembly which cannot be taken apart. You must replace the whole assembly, about $90. If you just want to clear the lens, you should ask about cleaners at your local auto parts store. There are several available but they must be reapplied every month or so.
To replace the headlight lens on a Mazda 6, start by disconnecting the car battery for safety. Remove the headlight assembly by unscrewing the bolts or clips holding it in place, then carefully pull the assembly out. Detach the old lens by removing any screws or clips, install the new lens, and reassemble the headlight assembly. Finally, reconnect the battery and test the headlights to ensure they are functioning properly.
There aren't headlight covers, it all one unit. One of my lens was cracked and I had to replace the whole unit.
Where the lens meets the housing there is a seal, just replace it.
You don't. Instead, you replace the entire assembly.
The lens itself is part of the composite headlight assembly. It all has to be replaced as a unit.