You have to remove the door panel to access handle screws. After that you have to disconnect pulling rods and replace the handle with another one.
According to the EPA, the interior volume of the 2002 Toyota Camry is 118.4 cu.ft..
Here's a great video that shows you how to replace the headlight on a 2002 Toyota Camry: carcarekiosk.com/video/2002_Toyota_Camry_LE_2.4L_4_Cyl./lights/headlight
Yes, you should be able to do that.
I usually replace fuel filter every after 35,000km and have had no problem since 2002.
You need to remove the door panel. And disconnect it from the wires. After you have to remove the transparent plastic protection covering the door. Remove the screws holding the handle and disconnect the arms. Installation is reverse to removal.
2002 and up four cylinders have a timing chain no belt.
you dont you dont
No, it's easy.
To replace the driver's side and rear right-hand side inside door handles on a 2002 Toyota Camry, start by removing the door panel. Use a flathead screwdriver to pry off the plastic cover and then unscrew the screws holding the panel in place. Once the panel is off, detach the door handle linkage and remove the old handle. Install the new handle by reversing the process, ensuring all connections are secure before reattaching the door panel.
get a BFH
Take the old one out and install a new one.
toyota recommends that timing belts be replaced at 60,000; however, 100,000 miles is fine. Replace at 100,000 miles as preventative maintenance. 4 cylinder 2002 Camry has a timing chain which does not have to be replaced.