Aftermarket seat belts can be bought at auto part stores or a junk yard. If their is no place to attach the belts, a hole should be drilled and bolted to the floor. If you drill holes in the floor (not recommended, there should be pre-existing seatbelt mounting holes) use fender washers, the really big washers with a small hole, they will help prevent the bolt from pulling through the floor under heavy load, such as an instantanious stop (collision) while restraining a passenger.
order new belts from an OEM supplier with new bolts and washers. remove rear seat and go to work!
NO. The rear seat has 3 sets of belts.
front or rear wheel drive?
To replace the rear seat belts in a 2004 Honda Element, start by removing the lower seat cushion by pulling it up and out. Next, unbolt the seat belt anchors using a socket wrench; there will typically be bolts at the floor and possibly at the vehicle's side or wall. Carefully detach the seat belt from the retractor and replace it with the new belt, ensuring all components are secured properly. Finally, reassemble the seat cushion and test the functionality of the new seat belts for safety.
how to replace belts on gilson model 51179
no
Rear seat belts are stuck
they don't have belts , there are two timing chains , one at the front and one at the rear of engine. no need to replace
5 seat belts 2 front 3 rear
The 2012 Ford Mustang has a total of 4 seat belts in the vehicle. There are 2 seat belts in the front and 2 seat belts located in the back for the rear passengers.
yes they did.
No they are not.