To replace the AC-heater control unit in a Daewoo Leganza, first, disconnect the vehicle's battery to ensure safety. Next, remove any surrounding panels or trim to access the control unit, typically secured by screws or clips. Disconnect the electrical connectors and remove the unit from its mounting. Install the new control unit by reversing the removal steps, ensuring all connections are secure before reassembling the dashboard.
Where is the fuse for the heater for the daewoo leganza? In:http://wiki.answers.com/Q/FAQ/913-2[Edit categories]
The heater control valve in a Daewoo Leganza is typically located in the engine compartment, near the firewall, where the heater hoses connect to the engine. It regulates the flow of coolant to the heater core, allowing for temperature control of the cabin. Accessing it may require removing components for better visibility, depending on the engine layout and design. Always consult the vehicle's service manual for specific instructions related to your model.
Remove the water from the cooling system. Remove the water hose from the heater core. Remove the heater core retaining bolts. Reverse the process to install the new heater core.
Remove dash,centre console,heater box and you'll find it in there
To replace the heater core in your Daewoo Leganza, start by disconnecting the battery and draining the coolant. Remove the dashboard and the center console to access the heater core, which is typically located behind the dashboard on the passenger side. Disconnect the hoses and any electrical connections, then remove the mounting screws to take out the old heater core. Install the new heater core by reversing the removal steps, ensuring all connections are secure and refill the coolant before reconnecting the battery.
In the Daewoo Lanos, the heater light typically refers to the indicator for the heater, which is part of the climate control panel. To replace it, you will need to remove the dashboard panel and the climate control unit. Once the unit is accessible, locate the bulb for the heater indicator, remove it, and replace it with a new one. After replacement, reassemble the dashboard to complete the process.
you need to get a new heater core
For example a 2000 Nissan Sentra and a 2000 Daewoo Laganza are the same heater core but the Maxima is not..............
You can't see it until you remove the dash and centre console,then remove heater box and you'll find it in there
To fix the heater flap in a 2001 Daewoo Nubira, first, remove the dashboard panels to access the heater control assembly. Check the actuator, as it may be faulty; replace it if necessary. Ensure that the linkage connecting the actuator to the flap is intact and properly aligned. If the flap itself is broken, you may need to replace it or repair any damaged components.
It could be a partially blocked heater core, a faulty heater valve that allows the coolant through the heater core or it could be a faulty water pump.
The heater matrix can be replaced by removing the heater core and temperature control cables. Replace the heater core and the control cables.