answersLogoWhite

0

Assuming you have the 3.2 L V6 motor; locate the ac pump on lower driver's side of the motor and the appropriate belt. The belt has a tensioner between the crankshaft and the ac pump and one must loosen the large nut ( 24 mm I believe ) that attaches to the pulley. Once you have loosened the nut the tension on the ac belt will be released and you can guide it around the fan and remove it. Get the new belt over the fan and onto the correct crankshaft pulley and over the ac pump pulley. Then put the nut back on the tensioner pulley but don't tighten it yet. Use a crow bar or the claw side of a claw hammer to get a hold on the bolt head that sticks straight up from the tension and pull it up. Tighten the large nut while applying tension to the belt in this manner. If you make the belt too tight you may cause wear on the ac pump clutch, so get it tight but don't use your Herculean stength to do it. New belts will often stretch after a short time of use so it isn't a bad idea to check the belt after a couple of days of driving and retighten it if necessary.

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

When do you replace the timing belt on a 2000 Isuzu trooper?

The timing belt on a 2000 Isuzu Trooper is replaced by removing the engine accessories, taking off the timing cover and loosening the tensioner. The belt can then be slipped off the sprockets and a new timing belt put in place.


What is the serpentine tensioner in a 99 Isuzu trooper?

What about this tensioner? How do you remove it, or how do you releave the tension so you can replace the belt?


What is the pattern for a 1998 3.5L Isuzu trooper serpentine belt?

The serpentine belt pattern for a 1998 3.5L Isuzu Trooper can be obtained from the car manufacturer upon inquiry. Isuzu is responsible for this information.


What are the timing setting on a 1993 Isuzu trooper 3.2 v6?

what are the timing belt setting for a 1993 Isuzu trooper 3.2 ltr v6 ...


How do you tighten belt on 1990 Isuzu trooper?

To tighten the belt on a 1990 Isuzu Trooper, first locate the tensioner pulley. Use a wrench or ratchet to turn the tensioner arm, which will relieve tension on the belt. Once the belt is loose, inspect it for wear and proper alignment, then reposition or replace it as needed. Finally, release the tensioner to tighten the belt back into place, ensuring it is secure on all pulleys.


After how many miles do you check cam belt on Isuzu trooper?

You don't check it you replace it. 1990-97 Replace at 60,000 miles 1998 Replace at 75,000 miles 1999 up Replace at 100,000 miles


Belt route for a 1999 Isuzu Trooper 3.5L?

how to set the timing on 3.5 liter engine on a trooper 98


Can you get a diagram of a belt pulley system for a 1988 Isuzu trooper?

The Isuzu Trooper has a diagram for how to route the serpentine belt under the hood. The diagram is located on top of the fan shroud on the left side of the hood locking latch.


Is a 2001 Isuzu Trooper have a interference motor?

Yes, the 2001 Isuzu Trooper is equipped with an interference engine. This means that if the timing belt were to fail, the pistons and valves could collide, potentially causing significant engine damage. It's important to maintain the timing belt and replace it according to the manufacturer's recommended schedule to avoid such issues.


How do you replace alternator on 2000 Isuzu Trooper?

To replace the alternator on a 2000 Isuzu Trooper, start by disconnecting the negative battery terminal to ensure safety. Remove the serpentine belt by loosening the tensioner, then unbolt the alternator from its mounting bracket. Disconnect the electrical connectors from the alternator, and then install the new alternator by reversing the removal steps, ensuring all connections are secure and the belt is properly tensioned before reconnecting the battery.


How do you replace the serpentine belt on a 2002 Isuzu axiom?

How do you put on a serpentine belt on a 2002 Isuzu axiom


Is there a timing belt on 2002 Isuzu trooper?

Yes, the 2002 Isuzu Trooper is equipped with a timing belt. It is crucial to maintain the timing belt according to the manufacturer's recommended schedule to avoid potential engine damage. Regular inspections and timely replacements are essential for the longevity and performance of the vehicle.