Remove the Negative terminal. loosen all belts as well as the tensioner bracket first then unplug the connector (+), then remove the remaining 4 bolts.
Try disconnecting the negative terminal while the engine is on, if the car dies it is your alternator.
what is the firing order for a corolla 1984? The firing order for Toyota Corolla from 1984 to 1989 is 1,3,4,2.
Replacing a starter on a 1989 Toyota Corolla is not very difficult to do. The wires will need to be disconnected from the old starter and labeled or taped. The starter is held in place by two bolts, unscrew the bolts and remove the old starter. Then replace with the new starter.
Remove the tire and wheel from your 1989 Toyota Corolla. Remove the end of the axle. Remove the axle seal. Remove the wheel bearing. Reverse the process to install your new wheel bearing.
TROUBLESHOTING FOR REPLACED STARTER IN TOYOTA COROLLA 1999.
Remove the wiring harness from the back of your 1989 Toyota alternator. Remove the alternator retaining bolts. Remove the alternator belt. Reverse the process to install the new alternator.
The 1989 Toyota Corolla Weygand rear speakers can be found in the side compartments of the rear of the vehicle. There will be a speaker on each side.
The recommended tire size for the 1989 Toyota Corolla is 175 R70 13. However, a size larger can be used with no harm to the car.
Not sure if 1991 and 1989 is sameNot sure if the alternator is under your right front seat on a 1989 model, but it is on 1991. You need to remove the seat and the top under the seat to get proper access. When that is done, it is easy removal of the alternator. You will see that the alternator is self explainable.
This is the best advise you will get. go to a Toyota dealer (Not any aftermarket parts store) and but a Toyota reman alternator. If you put an aftermarket alternator, you will have problems again. That's good advise from a former Toyota technician. Good luck.
15amp
In the car
Yes, the 1989 Toyota MR2 non-supercharged model shares its alternator with several other Toyota vehicles from that era. Specifically, it is often compatible with the alternators found in certain models of the Toyota Corolla and Camry from the late 1980s. However, it's essential to verify the part numbers and specifications to ensure compatibility before making a replacement.