0
It really isn't that bad.
Use a Phillips head screwdriver. For the drivers side, make it easy on yourself and take out the battery. Just undo the clamps and make sure you don't put something metal between the + and -. Then pop off the plastic shroud cover right behind the light; there are two plastic rivets that you pull back on and they pop out. You'll see that the center post moves in and out of the clamp part.
Then unscrew at least two of the 3 Philips screws of the light holder, twist, and remove the bulb holder. Press the tab, pull out the bulb, and put your new one back in. Reverse the steps and voila! Highly recommend a short screw driver, an angled screw driver, or an elbow ratcheting screw driver
When you put the plastic shroud cover back, make sure the 'post' is not inserted into the clamps. If it is, the rivet will be bigger than the hole and you'll have problems.
Same thing for the passenger side but much easier and nothing to remove.
3.22.08 Addendum. You are going to need a VERY short screwdriver for the driver side headlight. The design is tight on the 03+ models so the space is extremely limited. I ended up using a needle nose vice grip to get to the screw from the side. Good Luck
3.11.09 Addendum. I foolishly tried with a VERY short screwdriver. That is not good advice. There is NO screwdriver short enough to get to that screw at least on the drivers side. A side offset ratchet screwdriver is the good choice.
7.09.09 Addendum. Just replaced my low beam bulbs. The above information is good except for loosening/removing the 3 philipps screws. This is not needed at all.
Just unplug the electrical connection and then turn the bulb, it will come right out. Installation is just the reverse. No philipps screwdriver needed.
What else can I help you with?
How do you replace 2003 Nissan maxima headlight?
How do you replace 2003 nissan maxima headlight?
How do you replace radiator 2003 Honda Accord?
how do you replace the radiator on a 2003 V6 Honda Accord
How do you replace the headlight in a 2003 Oldsmobile Silhouette?
how do i replace the drivers side headlight in a 2003 oldsmobile silhoutte
how to replace headlight bulb 2003 park ave?
“how to replace headlight bulb 2003 park ave”
How do you change head light lenss?
i would like to know how you change a headlight lense on a 2003 Honda accord ? i would like to know how you change a headlight lense on a 2003 Honda accord ?
Do you need to remove the bumper to replace the headlight assembly on a 2003 Accord?
Yes, on a 2003 Honda Accord, you typically need to remove the front bumper to access the headlight assembly for replacement. This process involves removing several screws and clips that secure the bumper in place. Once the bumper is off, you can easily reach and disconnect the headlight assembly for replacement. Always consult the vehicle's service manual for specific instructions and safety precautions.
How do you replace the headlight assembly on a 2003 CLK500?
you fix it by a mechanic
Does the battery need to be removed to replace the left headlight on a 2003 VW Beetle?
Yes. You have to remove the battery before changing the driver side head light bulb.
Where is the location of OBD of 2003 Honda Accord?
The 2003 Honda Accord OBD 2 port is under driver side dash above dead pedal
How do you replace a broken headlight lens in a 2003 Eurovan?
To replace a broken headlight lens in a 2003 Eurovan, start by removing the headlight assembly. Open the hood and locate the screws or clips securing the headlight, then carefully detach the assembly. Replace the broken lens with a new one, ensuring it fits securely, and reattach the headlight assembly with the screws or clips. Finally, test the headlight to ensure proper functionality.
Where are the horns located on a 2003 buick rendezvous?
Under the driver side headlight
How do you remove oxidation on headlight on 2003 accord?
There are products and kits for this at most national chain auto parts stores.
