answersLogoWhite

0

here is the link to the nubira service manual

http://chevy.mrmax.dp.ua/EN/GMDE_TIS_START.html

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

How do you replace a knock sensor on a 2001 daewoo nubira?

How do you flush the transmission fuel from a 2000 Daewoo Nubira


Where is the shut off relay for a 2000 Daewoo Nubira?

it is right underneath the steering wheel gasket


Daewoo nubira veers to one side when accelerating?

I have a 2000 Daewoo Nubira and I had the control arm replaced and it fixed the problem.


Where is the ecm pcm located on a 2000 daewoo nubira?

In 2000 Daewoo Nubira the ECM is located on the front passenger side wall by the front passenger right foot.


Where is the CTS on a 2000 Daewoo Nubira 1.6?

behind the alternator


Where is the fuel pump located in a 2000 daewoo nubira?

The fuel pump on a 2000 nubira is under the back seat on the passenger side.


Where is the oxygen sensor on a 2000 Daewoo nubira?

on the exhuast header pipes


2000 Daewoo Nubira where is the fuel filter located?

Under the hood, right behind the throttle body, on the firewall. Actually, it is very easy to replace.


When do you change the timing belt for a 2000 daewoo nubira?

every 60,000 miles


How do you take the head gasket off a 2000 daewoo nubira?

To remove the head gasket from a 2000 Daewoo Nubira, first ensure the engine is cool and disconnect the battery. Then, drain the coolant and oil, and remove the intake and exhaust manifolds, cylinder head bolts, and any attached components like the timing belt or chain. Carefully lift the cylinder head off the engine block, taking care not to damage any surfaces. Finally, scrape off any remnants of the old gasket from both the cylinder head and block before installing the new gasket.


How do you time a 2000 Daewoo nubira?

you cant its all done electronically sorry mate !!


How many valves in a 2000 Daewoo Nubira CDX?

The Daewoo Nubira CDX has 16 valves - it is a 2 litre 16 valve double overhead camshaft 4 cylinder made by GMH in Australia!