answersLogoWhite

0

The parts cost $90 the labor is $400 plus..That should tell that th job is notan easy on. Many nuts vauum lines, and bracets including the intake manifol mst be removed....If you try it be careful and ake alot of pictures so you do not hae to ave it towed to the repair shop...

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

How do you replace rear wheel bearing hub on 2002 Hyundai xg350?

nO


Does a Hyundai xg350 have shocks?

no


Which is the number one spark plug in a 02 Hyundai xg350?

The number one spark plug for a 2002 Hyundai XG350 is typically the NGK ZFR5F-11 or equivalent. It's important to confirm the specific spark plug model by checking the owner’s manual or consulting with a parts professional, as variations may exist based on the engine type or specific vehicle configurations. Always ensure to use the recommended spark plug for optimal performance.


What is the cost to replace an alternator for 2002 Hyundai xg350?

$500-$600 w/ the dealer. They have to pull the radiator out to get down to the alternator underneath it. Happened to me.


Does the 2002 Hyundai XG350 have an interference engine?

Yes


Where is the fuse box on your Hyundai XG350?

under the hood


What cars start with x?

· XG350 (Hyundai) · XJ6 (Jaguar)


What is the lug nut pattern for a 2002 Hyundai XG350?

The lug nut pattern for a 2002 Hyundai XG350 is 5 bolts with a spacing of 114.3 mm (4.5 inches). The lug nut size is typically M12 x 1.5. If you need to replace or upgrade wheels, ensure that these specifications match to ensure proper fitment.


How do you install a crankshaft sensor on a Hyundai xg350?

A crankshaft sensor, on a Hyundai XG350, can be installed by simply plugging the new sensor into the slot of the old sensor. The sensor can be located on the back of the engine cover.


How do you replace ac pump on Hyundai xg350?

To replace the AC pump on a Hyundai XG350, first, disconnect the negative battery terminal to ensure safety. Remove any components obstructing access to the AC compressor, such as the drive belt and mounting bolts. Disconnect the AC lines from the compressor, then unbolt the compressor and remove it from the vehicle. Install the new compressor by reversing these steps, ensuring to recharge the AC system with refrigerant afterwards.


How do you change Hyundai XG350 transmission fluid?

If you need to change the transmission fluid in your Hyundai XG350, it's best to have a trained, certified technician perform the service for you. However, if you want to attempt to change the fluid on your own, you first remove the drain plug, allow the fluid to drain completely, replace the plug, and add the new fluid in the dipstick hole.


How do you replace front brake pads for Hyundai XG350?

To replace the front brake pads on a Hyundai XG350, start by safely lifting the vehicle and removing the front wheels. Then, remove the caliper bolts and slide the caliper off the rotor, taking care not to strain the brake line. Remove the old brake pads from the caliper bracket and replace them with new ones, ensuring they are properly seated. Reassemble the caliper, tighten the bolts, and reinstall the wheels before lowering the vehicle.