drian raidiator, disconnect airintake sensors, remove intake, follow upper radiator hose to the Thermostat housing, remove 2 bolts, hose should move enough to get new thermostat in, install new thermostat with the little vent thing up and a new gasket
notes: gasket cement helps in installing parts in difficult locations and there are 3 different thermostats for the 1.5l, also if possible back flush before starting takes about 1hr the cooling system since you have to drain anyway
how to replace the thermostat on a 2003 Mazda protege es 2.0
where is the thermostat on a 1999 mazda protege?
Where is the thermostat location on mazda protege 2003?
how do replace the thermostat on a 1999 mazda b2500 truck?
follow the bottom radiator hose up to the engine and remove the two bolts an you should see it
To replace the thermostat on a 2002 Mazda Protege, first, ensure the engine is cool and disconnect the negative battery terminal. Drain the coolant from the radiator, then remove the upper radiator hose and the thermostat housing. Take out the old thermostat, clean the mating surfaces, and install the new thermostat with the correct orientation. Reassemble the housing, reconnect the hose, refill the coolant, and check for leaks after starting the engine.
thermostat is located where the lower hose conects to the engine
Could you tell me how would you replace the oil pump on a Mazda Protege?
Follow the upper rad hose from the radiator to the engine and you will find a housing thas has the thermostat. Take the housing off and when you reinstall the thermsotat, make sure the spring is toward the engine.
How do you replace power steering belt on 2003 Mazda protege ?1.6
where is the transmission shift solenoid located on a 2001 Mazda protege
How you replace the cabin filter mazda protege 5 2003