Replace water pump for an 1986 Chevy Nova?
It is behind the timing case cover behind the crankshaft pulley.You have to remove the timing belt to replace the water pump for this repair.
No
u
To replace the water pump on a 1986 Mazda RX-7, first, disconnect the battery and drain the coolant from the radiator. Remove the drive belts, then detach the water pump by unbolting it from the engine block, ensuring to also remove the timing cover if necessary. Clean the mating surfaces, install a new gasket or sealant, mount the new water pump, and reassemble everything in reverse order. Finally, refill the coolant and check for leaks before starting the engine.
The water pump from Mazda 626 is the same, all part from Mazda 626 work very good in the Kia Credos and Clarus.
In order to remove the water pump on a 2000 Mazda Millennia, you must first remove the timing belt and the pulley for the water pump. Remove the pump itself by detaching the four bolts that are securing it. Next, replace any gaskets, install the new pump, then the pulley, and then the timing belt.
Could you tell me how would you replace the oil pump on a Mazda Protege?
About $500.00
2.5hrs
The water pump is located behind the timing belt cover and is driven by the timing belt. You need to reove it to gain access to the water pump.
powersteering belt off first, then water pump, each has its own ten.