0
Not a quick job. Timing belt covers have to come off, which means most of the stuff on the right side of the engine, including the motor mount. the water pump is driven by the timing belt - brilliant design concept NOT. start with timing belt replacement instructions....might as well change the belt while you're there. it is under the timing cover. easy to replace pump hard as hell to get to it. remove tire remove inspection panel then remove all belts then remove crank pully then remove timing cover and there it is. replace timing belt while your at it.
What else can I help you with?
Where is the turn signal relay located and how do you replace it located on a 1988 Toyota Camry?
it is in taylorville
How do you replace the water bypass pipe on 1988 Toyota Camry?
I'm dealing with the same problem on my station wagon Camry 1989. Pep boys say have to order thru Dealer
How do you change a fuel injector on a 1988 Toyota Camry?
How do you change a fuel injector on a 1988 Toyota Camry
How do you replace keys for 1988 Toyota Camry?
Call up a locksmith and have a talk with him will direct you in the right direction.
What is the spark plug gap on 1988 Toyota Camry?
what is spark plug gap for a 1988 Toyota Camry? using a 5503 autolite.
How do you replace the thermostat on a 1988 Toyota Camry?
thermostat is located on engine block. follow top water hose leading to engine. thermostat is located inside the water intake. remove hose. remove water intake(two bolts)housing. replace thermostat. .
How do you set timing marks on 1988 Toyota Camry engine type is 3S-FE 4-cylinders.?
1988 Toyota Camry, engine type is 3S-FE
How do you set timing marks on 1988 Toyota Camry engine type is 3S-FE 4-cylinders?
1988 Toyota Camry, engine type is 3S-FE
How do you replace the water pump on a 1988 Toyota Camry 4 cylinder?
In order to replace the water pump on a 1988 Toyota Camry v4, first remove the front timing belt cover as well as the motor mount on the passenger's side of the vehicle. In order to remove the mount, the engine must be supported. Before removing the timing belt, mark the camshaft and crankshaft for guidance during replacement. Remove the water pump, and apply new gaskets to the new water pump with a sealant. Install the new pump, then the hardware that had been removed in order to access the pump.
How to replace the front speakers on a 1988 Toyota Camry?
A very short Phillips head screwdriver to remove the 2 screws in the cover and lift out. There is not much roomk.
What is the fuel tank size of a Camry 1988?
On a 1989 Toyota Camry, the fuel tank capacity is 15.9 gallons.
Will a 1988 Toyota Camry starter fit on a 1990 Toyota pick up 22r-e?
Maybe
