To replace the thermostat in a 2002 Isuzu Rodeo, first ensure the engine is cool, then disconnect the negative battery cable. Drain the coolant from the radiator and remove the upper radiator hose connected to the thermostat housing. Unscrew the thermostat housing, take out the old thermostat, and clean the mating surfaces before installing the new thermostat and gasket. Reassemble everything, refill the coolant, and reconnect the battery.
On a 2002 Isuzu Rodeo, the thermostat is located at the end of the top radiator hose on engine. It is situated under the intake manifold.
P245/60R18 are the size tires needed for a 2002 Isuzu Rodeo. Michelin and Goodyear are great tires for the 2002 Isuzu Rodeo.
cylinder one on a 2002 isuzu rodeo 3.2 engine is on center drivers side
Isuzu rodeo 3.2 V6 LS.
how do you change the serpentine belt on a 2001 Rodeo
Oh, dude, replacing the coolant temperature sensor on a 2002 Isuzu Rodeo is like a walk in the park... if the park was full of rusty bolts and confusing diagrams. First, locate the sensor near the thermostat housing, then disconnect the electrical connector and unscrew the old sensor. Finally, just pop in the new one, tighten it up, reconnect the connector, and voila! Your Rodeo will be running cooler than a cucumber in a snowstorm.
Under the car by the drivers seat that's the first thing i had to replace on mine
R134a
it is low coolant temperature, could be the thermostat could be the sensor for coolant temperature.
Take it to a mechanic!
20 gallons
anti theft