0
drain some of your antifreeze and disconnect your top radiator hose from cover,then remove 2 bolts holding cover on,remove thermostat and clean gasket off both surfaces,check new thermostat to see if it opens at 180 degrees,then apply sealent to both surfaces and install gasket and thermostat and 2 bolts and tighten and put hose back on and tighten clamp and add antifreeze,then crank and check for leaks.
What else can I help you with?
Do you have a diagram of the thermostat location 96 Nissan pickup?
A diagram of the thermostat location on a 96 Nissan pickup can be gotten from the Nissan dealership. It can also be purchased from most auto parts stores.
Where is the thermostat on a 96 Nissan pickup?
follow the top radiator hose to the intake, its inside the cover.
Can you replace a 97 Nissan pickup engine with an 87 engine?
96 and 97 go together .no 87.
Where is the thermostat on a 96 Nissan Altima?
The thermostat on a 96 Nissan Altima is located on top of the engine at the upper radiator hose. It is contained under the thermostat housing which holds it in place.
What is the torc on a 96 Nissan pickup on the bolts?
Fcxif
How do you replace thermostat on 96 Nissan Maxima?
To replace the thermostat on a 1996 Nissan Maxima, first, ensure the engine is cool and disconnect the negative battery cable. Drain the coolant from the radiator, then remove the upper radiator hose from the thermostat housing. Unbolt the thermostat housing, take out the old thermostat, and replace it with a new one, ensuring the gasket is in place. Reassemble everything, refill the coolant, and reconnect the battery.
Does YOUR 96 Nissan Maxima need a thermostat?
Yes
Where is the speed sensor on a 96 Nissan pickup?
Its mounted on the transmission.
What motor interchanges 96 Nissan pickup?
If you are talking about a 2.4 96 and 97 are the same but only 96/97
How do you change a water pump in a 96 Nissan Quest van?
how to replace waterpump on 96 nissan quest
How do you replace battery in 96 Mazda B3000 pickup?
ask
How do you replace a broken wheel stud on a 96 4x4 Nissan pickup?
Notice there are two threaded holes in the brake drum. Insert a metric bolt into the holes and tighten until the drum pops off. Replace the stud.
