answersLogoWhite

0

To replace the throttle position sensor (TPS) on a 1993 Suzuki Sidekick, first disconnect the negative battery cable to ensure safety. Remove the electrical connector from the TPS, then unbolt the sensor from the throttle body. Replace it with the new sensor, ensuring it is aligned correctly, and reattach the electrical connector. Finally, reconnect the battery cable and start the engine to check for proper function.

User Avatar

AnswerBot

2mo ago

What else can I help you with?

Related Questions

Where is the throttle position sensor on a 1993 chevy 1500 4.3?

The throttle position sensor is on the throttle body opposite of where the cables attach.


How do you replace the throttle position sensor in a 1993 subaru impreza?

To replace the throttle position sensor (TPS) in a 1993 Subaru Impreza, first disconnect the negative battery cable to ensure safety. Locate the TPS on the throttle body, disconnect the electrical connector, and remove the two screws securing the sensor. Install the new TPS by aligning it properly, securing it with the screws, and reconnecting the electrical connector. Finally, reconnect the battery and check for proper operation.


Where is the throttle position sensor on a 1993 Nissan Maxima SOHC?

on the side of throttle body


Where is the Throttle position sensor located on a 1993 E150 van 5.0?

It is mounted to the throttle body.


Where is the throttle position sensor on a 1993 Plymouth Voyager 3.3L?

It is on the throttle body opposite of where the cables attach.


Where is the Maf sensor located on a Honda Del Sol 1993?

The map sensor is located on top of your throttle body. If u have stock or after market intake that is connected to the throttle body right on top of the throttle body there is a black sensor and it will say map sensor Hope this helped


Where is the crank position sensor on a 1993 Suzuki Sidekick?

there isn't one ( 96 it start that year) you only have a cam sensor in the base of the distributor.


Where is the map sensor on a 1993 dodge 3.9 van?

It is located on the front of the throttle body.It is located on the front of the throttle body.


Would a faulty o2 sensor cause a '93 sidekick to stall?

Yes, a faulty O2 sensor might cause a 1993 Sidekick to stall. It would also cause the car to misfire and use far more gasoline that it needs.


Where is crank sensor on a 1993 Jeep Cherokee 5.2 l?

It should be on or near the throttle body.


How do you replace the tps on a Chevy s10 1993 pick up?

The throttle position sensor is located on the top of the engine. Now depending on which engine is in your S10, the location will be relatively in the same spot. Follow your air intake plastic tubing to the top of engine. The sensor is located on the side of the throttle body. Usually has 2 screws that mount it to the side of the throttle body where the shaft goes through. If yours has slots on the sensor, it will have to be adjusted with a scan tool.


Where can you find the throttle position sensor in a 1993 Oldsmobile cierra cutlass?

The Throttle Position Sensor (TPS Sensor) is located underneath the air intake< right below the Idle Control Valve. If your new, Find where your throttle cable hooks up & its right there. Its on the throttle body. When you follow the throttle cable, you will see it go to a lever that turns a shaft. The TPS is on the opposite end of the shaft.