remove heads seal oil drain so seals dont fall in. then loosen and remove seals. replace and put engine back together. may need special mitsu. tools
To replace the spark plug seals on a 1994 Toyota Camry V-6, first remove the valve cover by unscrewing the bolts and carefully lifting it off. Then, take out the old spark plug seals from the valve cover, cleaning any debris. Install the new seals into the valve cover, ensuring they are seated properly. Finally, reassemble the valve cover, tightening the bolts to the manufacturer's specifications to prevent leaks.
idle control valve
To replace the valve stem seals on a 1994 Jaguar XJ6, first remove the valve cover to access the cylinder head. Then, use a compression tool to hold the valve springs in place while you remove the retainers and springs. Carefully pull off the old seals and replace them with new ones, ensuring they're seated properly. Finally, reassemble the components in reverse order, making sure to torque everything to the manufacturer's specifications.
The fuel filter for the 93 is under the battery box..Look there first..
Replace the whole rack, it would take speical tools to replace seals
change the valve stem seals
== ==
1) Replace the belt or make sure it is tight. 2) Replace the AC compressor.
The easiest way to replace the gas tank vent valve on 1994 BMW 325i is to replace the gas cap. The vent valve is attached to the gas cap and is easy to find through the dealerships or online.
doesn't have a choke , but has an enrichener valve , remove the bolts that hold the valve ,take it out unplug & replace ,can be found near throttle body .
163 mph
The fuse box on a 1994 Mitsubishi 3000GT is located in the engine compartment, near the driver's side near the windshield. There is also an interior fuse box located underneath the dashboard on the driver's side, to the left of the steering column. You can access both boxes by removing the cover to check or replace fuses as needed.