To reset the engine light on a 2011 Kia Sportage, you can disconnect the car battery for about 15 minutes to clear the codes. Alternatively, you can use an OBD-II scanner to read and clear the trouble codes that triggered the light. After addressing any underlying issues, reconnect the battery or use the scanner to reset the light. If the light comes back on, it's essential to diagnose and fix the problem causing it.
The 2011 Kia Sportage has an inline 4 engine.
The 2011 Kia Sportage has a 2.4 L base engine size.
The 2011 Kia Sportage's engine produces 176 hp @ 6000 rpm.
The 2011 Kia Sportage's engine produces 168 ft-lbs. @ 4000 rpm.
With the engine and ignition off push and hold in the odometer reset button. While holding that button in, turn on the ignition but do not start the engine. After about 5 seconds the light will go off and the maintenance required light will have been reset.
You have to fix the cause of the code that turned the light on. It can than be reset with a scan tool.You have to fix the cause of the code that turned the light on. It can than be reset with a scan tool.
To reset the maintenance light on a 2011 Acura TL, turn the ignition to the "ON" position without starting the engine. Press the "Menu" button on the dashboard, navigate to "Vehicle Settings," and select "Maintenance Info." From there, choose "Reset" for the maintenance reminder you wish to clear. Finally, confirm the reset, and the maintenance light should turn off.
Key on engine off, press gas pedal to the floor three times
It is very easy to reset the oil light after you had an oil change in your 2011 Ford E350. You will just need to disconnect the battery for up to 1 minute to reset the light.
The 2011 Kia Sportage has 16 valves.
The 2011 Kia Sportage is a gas-powered vehicle.
The 2011 Kia Sportage has a 6-speed manual.