Some slightly better, more detailed instruction...Also works on the Armada
Try This, I got this from ClubArmada.com It worked for me.
Since some of you guys here are new owners I thought I'd save you a trip to the dealer once you start modifing your armada's. I'm not sure what set's it off (other than pulling things apart) but at some point you will likely end up with a flashing airbag sensor light. Here is how to reset it yourself.
1. Turn the key from off to on(not ACC).
2. Watch the airbag light closely. It will stay on for a few secs. and then as soon as it blinks off (the start of the flashing), turn the key off instantly.
3. Count to 5 secs(1 Mississippi, 2 Mississippi . . . .)
4. Repeat steps 1-3 two more times until you have done the cycle three times.
5. Now turn the key on and watch the light. It will start blinking in a different, slower manner. This is diagnostic mode. You can watch this for a little while, no hurry.
6. Now turn the key off again, Count to 5 like in step 3 again, and turn back on. If the procedure worked, the airbag light will not be flashing.
Wola!!
1996 nissan sentra air bag flashing how to reset
lookup on youtube and follow altima airbag reset it's the same
To reset your airbag light, in a Nissan Altima, you should turn the car on. From there, as soon as the airbag light stops flashing, turn the car off instantly. Repeat this three times to reset the airbag light.
This must be taking to a qualified person to have checked out.
= How do you reset the Airbag light on a 2001 Nissan Maxima SE ? =
how to reset nissan 350Z airbag air bag light and infiniti G35 air bag ...www.youtube.com/watch?v=g5UQIF3Euu0
One option to reset is to disconnect the positive (+) battery cale on the battery for 3 minutes. Then reconnect it , this will reboot the computer and the light. SORRY: It doesnt work on the Nissan 2003 350z to do this.
A flashing SRS light means there is a problem. It is a 2005 and the SRS is still under warranty. Take it to the dealer for repair.
[l[
drive the car into a brick wall
To reset the flashing airbag light on a Nissan Almera Tino, first ensure that the vehicle's ignition is turned off. Next, locate the airbag control unit, usually found under the driver's seat, and check for any loose connections or faults. If no issues are found, use an OBD-II scanner to clear any stored error codes related to the airbag system. Finally, turn the ignition back on to see if the light has reset; if it remains, consult a professional mechanic for further diagnosis.
To reset the flashing airbag light on a 1999 Infiniti G20, first, ensure that the vehicle is off. Then, disconnect the negative battery terminal and wait for about 10 minutes to allow any residual power to drain. Reconnect the battery and start the car, which may reset the airbag light. If the light remains on, it could indicate a persistent issue that may require professional diagnostics and repair.