To re-set Toyota Highlander 'maintenance required' dashboard warning light: Turn on the ignition and observe the odometer window. Ensure that it is set on the totalaccumulated mileage of the vehicle (NOT the trip meter). Turn off ignition. With the ignition off - depress the little plastic switch that changes the odometer to the trip meter and then while holding the switch in the depressed position, turn on ignition (it is not necessarry to start the car). Continue holding the switch down for 5-10 seconds and you will see the odometer window flash back to zero. Release the switch and turn the ignition off, and it will be re-set for another 7,500 miles.
I found a reset button under the dash board. You may want to look there first.
The service light indicator on a 2004 Chevy Cavalier tells its owners when to send the vehicle in for maintenance. To reset the light, unplug the battery for five seconds.
To reset the maintenance light on a 2004 Honda Accord, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After this, the maintenance light should turn off. If it doesn’t reset, repeat the process.
To reset the maintenance light on a 2004 Nissan Armada, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After doing this, the maintenance light should turn off, indicating that the reset was successful. If the light remains on, repeat the process or consult the owner's manual for further instructions.
A person can reset the maintenance required light on a 2004 Toyota Sienna by holding down the odometer trip button. A series of zeroes will appear, which indicates that the light has been reset.
Yes, there is an ABS light indicator in the 2004 Toyota Highlander model.
Press and hold the trip set knob (inside the speedometer) until it reads 0000, and while holding it try to turn the ignition key to acc. DO NOT START the engine. The messege will clear
Read the owners manual. It has step-by-step instructions.
i tryed on my car it does not work pit light still on
how do you reset change the oil light in a 2004 alero?
Reset the light by following the procedure below: 1. Turn the ignition key to the "OFF" position. 2. Turn the ignition key to the "ON" position while holding down the trip meter reset button.
same as a 2005 odometer OS on turn key off hold reset turn key on loght flashes then turn off