NOTE:
Anytime the battery terminal has been disconnected, please initialize the driver's door power window and front passenger's door power window after reconnecting the battery terminal.
With ignition switch in the "ON" position, do the following:
1. Push down and hold the driver's door power window switch to completely open the window.
2. Pull and hold up the driver's door power window switch until the window closes.
Continue holding the switch for approximately one second until the switch changes from blinking to a constant illumination.
3. Check for proper operation of the "one-touch open and close" function by fully pushing the switch briefly to the "DOWN" and "UP" positions.
At this time the power window switch for the passenger's door window should be blinking.
4. Push down and hold the passenger's door power window switch to completely open the window.
5. Pull and hold up the passenger's door power window switch until the window closes.
Continue holding the switch for approximately one second until the switch changes
from blinking to a constant illumination.
6. Check for proper operation of the "one-touch open and close" function by fully pushing the switch briefly to the "DOWN" and "UP" positions
Can't figure out how to delete a question. Switch in glove box.
To remove a window from a 2003 Toyota Highlander, first, ensure the vehicle is off and the battery is disconnected for safety. Remove the door panel by unscrewing any visible screws and gently prying it away from the door frame. Disconnect any electrical connectors for power windows or locks, then carefully remove the window by loosening the window regulator bolts and lifting the window out of the frame. Reassemble by reversing the steps.
To reset the power windows on a 2000 Toyota 4Runner, start by ensuring the ignition is in the "ON" position. Fully lower the window using the switch, then hold the switch in the down position for a few seconds after it reaches the bottom. Next, raise the window fully while holding the switch up for a few seconds after it reaches the top. This process helps recalibrate the window's automatic function.
There is only one fuse for all power windows. If only the passenger side window does not work, the problem is either with the passenger window switch or the motor on that window.
The 2012 Toyota Highlander is 6 ft. 3.2 in. (75.2 in.)1 one-touch power windows wide.
The 2001 Toyota Highlander is 5 ft. 11.9 in. (71.9 in.)1 one-touch power windows wide.
The 2010 Toyota Highlander is 6 ft. 3.2 in. (75.2 in.)1 one-touch power windows wide.
The 2009 Toyota Highlander is 6 ft. 3.2 in. (75.2 in.)1 one-touch power windows wide.
The 2008 Toyota Highlander is 6 ft. 3.2 in. (75.2 in.)1 one-touch power windows wide.
The 2005 Toyota Highlander is 5 ft. 11.9 in. (71.9 in.)1 one-touch power windows wide.
The 2003 Toyota Highlander is 5 ft. 11.9 in. (71.9 in.)1 one-touch power windows wide.
The 2011 Toyota Highlander is 6 ft. 3.2 in. (75.2 in.)1 one-touch power windows wide.