0
The answer below is the correct answer...I just used it on my 04 MDX.
Press and hold the select and reset buttons on the right side of the guage cluster. Turn the ignition to run (II), the light will flash once, then stay on steady. Hold the buttons with the ignition in run until the light turns off.
What else can I help you with?
How do you reset the maintenance light on a 2009 Acura MDX?
To reset the maintenance light on a 2009 Acura MDX, start by turning the ignition to the "ON" position without starting the engine. Press the "Menu" button on the dashboard, navigate to "Vehicle Settings," and select "Maintenance Info." From there, choose "Reset" to clear the maintenance light. Turn off the ignition, and then start the vehicle to ensure the light is reset.
How do you turn off Acura MDX maintenance light?
To turn off the maintenance light on an Acura MDX, start by turning on the ignition without starting the engine. Press the gas pedal three times within five seconds. After that, turn the ignition off and then back on to verify that the maintenance light has been reset. If it remains on, repeat the process.
How do you reset oil change light on Acura MDX?
To reset "MAINTENANCE REQUIRED" light, turn ignition off, press and hold the SELECT and RESET buttons. Turn ignition and hold buttons for 10 seconds until the indicator resets. works on 2003 mdx for sure.
How do reset maintenance light on 2011 Acura MDX?
To reset the maintenance light on a 2011 Acura MDX, first turn the ignition to the "ON" position without starting the engine. Then, press the "Select/Reset" knob on the dashboard until the oil life indicator appears. Press and hold the knob for about 10 seconds until the oil life resets to 100%. Finally, turn off the ignition to complete the process.
Reset the tire pressure light on Acura MDX?
By putting air in the tire(s) that need it.
Reset the engine check light on Acura MDX?
Have vehicle scanned to determine problem and have codes cleared
How do you reset the climate screen on an Acura MDX?
large
How do you reset sh-awd light on a 2008 Acura MDX?
To reset the SH-AWD light on a 2008 Acura MDX, start by turning the ignition to the "On" position without starting the engine. Press the gas pedal three times within 10 seconds, then turn the ignition off. After that, start the engine to see if the light has reset. If the light persists, there may be an underlying issue that requires professional diagnostics.
You changed the battery on a 2004 Acura MDX need to reset the radio?
There should be a acura business card in the owners manual that has a reset code
How do you reset A16 on an Acura MDX?
Refer to owners manual or have serviced at dealer.
How do you reset the oil change light on 2008 mdx?
To reset the oil change light on a 2008 Acura MDX, start by turning the ignition switch to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After that, turn the ignition off and then back to the "ON" position to verify that the oil change light has been reset. If the light is off, the reset is successful.
When was Acura MDX created?
Acura MDX was created in 2000.
