press the reset and select switch at same, turn ign. key to II (On) and wait 10 seconds
To reset the maintenance required message in a 2006 Acura TSX, start by turning the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. Turn the ignition off, then start the engine, and the maintenance light should be reset. If the light remains, repeat the process.
Press and hold the select AND reset buttons at the same time. Turn ignition switch to on and wait maybe 10 seconds until the maintenance light goes out.
How to reset maintenace light on 1999 acura t l 3.2
reminder to change oil you can reset it by inserting your key its actually pretty useless
reset switch by Honda or acura part number 07paz-oo10100
To reset the maintenance light on a 2011 Acura TL, turn the ignition to the "ON" position without starting the engine. Press the "Menu" button on the dashboard, navigate to "Vehicle Settings," and select "Maintenance Info." From there, choose "Reset" for the maintenance reminder you wish to clear. Finally, confirm the reset, and the maintenance light should turn off.
To reset the maintenance light on a 2009 Acura MDX, start by turning the ignition to the "ON" position without starting the engine. Press the "Menu" button on the dashboard, navigate to "Vehicle Settings," and select "Maintenance Info." From there, choose "Reset" to clear the maintenance light. Turn off the ignition, and then start the vehicle to ensure the light is reset.
Depending on the mileage on the car, there are some maintenance requirements to be done by you, or the car dealer. The maintenance light will stay "on" until these maintenace issues are completed. Your owner's manual also tells you how to reset the maintenance light, and outlines the maintenance required per the mileage on the car.
Not quite sure how to do it manually, but if you spend the extra couple of dollars to go to a Acura dealer they will reset all the warning lights on the vehicle.
To reset Maintenance light, switch key to on position, do not start. Press select and reset buttons at same time for about 15 to 20 seconds, then switch key off. If reset occured, the light will go off when you restart engine. If not, repeat process. Took three time for me.
To reset the maintenance light on a 1996 Acura RL, first, turn the ignition to the "ON" position without starting the engine. Next, press and hold the "Select" and "Reset" buttons on the instrument panel until the maintenance light blinks and then goes off. Release the buttons, and the maintenance light should be reset. Finally, turn the ignition off and then back on to ensure the light remains off.
i dont know how