0
a SCAN TOOL HAS TO BE USED TO RESET THE LIGHT. FOR EXAMPLE, WITH A SNAP-ON SCAN TOOL THERE IS AN OPTION ON THE SCROLL DOWN LIST THAT SAYS "RESET EMR LAMP"
on the back of the instrument group in the dash is a small hole that you insert a push-pin tool into to reset the latch relay that was activated by the odometer to enable the light. You can reach it with a jewelers screwdriver, but you need to disconnect the battery first (is the stereo off before disconnecting the battery?) and turn the camlocks that hold the backplate up. Better idea is take it to the dealer and have them reset it for you. It is there to remind you to have the timing belt replaced and the O2 sensor checked. if either fails, you will regret this decision to ignore the service call.
What else can I help you with?
How do you reset maint reqd light on 1992 Plymouth voyager?
The maintenance required light requires a scan tool to be reset.
Reset the maintenance required light on 08 Toyota rav 4?
maintenance with engine
How do you reset the maintenance required light on a 1992 Dakota 5.2L?
The maintenance light,You will need to take it to a Dodge dealer to reset it. Or get a DBR-2 code scanner.BIG $$$
Reset maintenance required light 92 Dodge Dakota?
aperantly take the light out
How do you reset the maintenance reqired light in the 2011 smart key Toyota RAV4?
How do you reset the maintenance required light in the 2011Toyota RAV4 with a smart key starting system
How do you reset the Maintenance Required Warning Light on a 89 Dodge Dakota?
To reset the maintenance required warning light on a 1989 Dodge Dakota, unhook the battery connector cables for 10 minutes. Reconnect them and start the vehicle.
How do you reset the maintenance required light on a 2011 Honda Accord -?
With the engine and ignition off push and hold in the odometer reset button. While holding that button in, turn on the ignition but do not start the engine. After about 5 seconds the light will go off and the maintenance required light will have been reset.
How do you reset the maintenance required light in a 2007 Toyota?
To reset the maintenance required light in a 2007 Toyota, first, turn the ignition switch to the "OFF" position. Then, press and hold the trip meter reset button while turning the ignition to the "ON" position (do not start the engine). Continue holding the button until the maintenance light flashes and then turns off. Release the button, and the light should be reset.
How do you reset Maintenance required light on a 2001 Honda Accord ex?
How do you reset the maintenance light on a 2001 Honda accord ex I found some options at http://www.tegger.com/hondafaq/maintenance-reqd-light.html#why
How do you reset the maintenance required light on a 2007 Toyota Tacoma V6?
disconnect the battery
How to reset the Required maintenance light in Mitsubishi pick up?
Read your owner's manual.
How do you reset the maintenance required light on your 2013 Lexus es350?
To reset the maintenance required light on a 2013 Lexus ES350, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After that, turn the ignition off, then back on, and the maintenance light should be reset. If successful, the light will no longer be illuminated when you start the vehicle.
