0
There is a button beneath the dashboard to the right of the steering wheel roughly in line with the gas pedal. If you reach under and feel around you can hit it while sitting in the seat, although until you know what you're feeling for it may be easier to stick your head under there and look for it. You'll have to hold the button down for a few seconds while the car is on for the light to go out.
What else can I help you with?
How do you reset maintain require light on 1999 acura integra?
To reset the maintenance required light on a 1999 Acura Integra, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. The maintenance light should turn off, indicating that the reset was successful. If it doesn't reset, repeat the process to ensure it's done correctly.
Turn off the maintenance required light on your 1998 Acura Integra?
if you feel underneath the dashboard to the right of the steering column; you will find a button. push and hold it until the light goes off. It is hard to feel, it is probably best to just get down there and look for it. In my 1999 integra it is a little square blue button.
Why is your maitenance required light on in a 1994 Acura Integra?
Has your timing belt been changed? From what I understand, the car automatically turns on the light every 60,000 miles (the recommended interval between timing belt changes). I changed mine well after the light came on (it came on while the previous owner still had it) and the belt was long overdue. Also, when you do change it, you have to manually reset the light.
What does Maintenance required light on mean in 2003 acura tl 3.2?
Time for an oil change
How do you reset the maintenance required light in a 2000 Acura Integra?
There is a small square button underneath the dash just to the right of the steering collumn. With the key in the ignition, in the off position, press the button for 7-10 seconds, then turn the key to ACC. This should reset the maintenance required light. It is a gimmick to get you to take your vehicle to the dealership so they make money off of you for resetting it.
Where is the brake light fuse located for a 1995 Acura Integra?
The brake light fuse on a 1995 Acura Integra is located inside the cabin of the vehicle. It is on the same circuit as the dash and hazard lights.
What could a maintenance required light be indicating on a acura tl 2000?
Depending on the mileage on the car, there are some maintenance requirements to be done by you, or the car dealer. The maintenance light will stay "on" until these maintenace issues are completed. Your owner's manual also tells you how to reset the maintenance light, and outlines the maintenance required per the mileage on the car.
Where is DRL Daylight running light located for Acura 1990 integra?
i am pretty sure there are no daytime running lamps on a 90' integra...
How do I change the brake light on my 1997 Acura Integra?
The brake lights are located in the trunk of a 1997 Acura Integra. To replace them open the trunk and find the plastic housing. Remove and replace the bulbs.
What brake light bulb goes in a 1991 Acura Integra?
The 1991 Acura Integra brake lamp number is 2057. See sources and related links below for a picture and more information.
1990 acura integra tail light does not work fuse is okay?
check the bulbs
97 acura 3.0 cl and just got an oil changed and the maintenance light went from green to yellow what does this mean?
i have a 97 acura 3.0 cl and just recently got an oil change and the maintenance required light switched from green to yellow, what does this mean?
