You need a special computer for that. Check the gas cap first, make sure its tight, sometimes that sets it off.
HAs it had an oil change recently ? Also check oil level.
A maintenance light on a Toyota Camry can be reset by your mechanic after you have the work done that is needed. You also may be able to get instructions by checking your manual.
On my 04 Camry that means it's time for an oil change.
When the maintenance required light in your 2010 Toyota Camry blinks eight times and then goes out, it typically indicates that the vehicle's maintenance reminder system has been activated. This usually signifies that it's time for routine maintenance, such as an oil change or other scheduled service, based on the mileage or time interval since the last service. It’s advisable to check your owner’s manual for specific maintenance recommendations and to reset the light after completing the required maintenance.
Check engine light or required maintenance light. Procedure for resetting required maintenance light just answered. Check engine light requires an OBD II to determine problem and turn the light off.
This is how to reset "Maintenance Required" light on Toyota Camry with "Smart Key" feature.This works on 2007 and newer Camry models, including the Camry Hybrid. Put the odometer on "Trip A." Turn off the car, hold down the odometer button and, without putting foot on the brake, push "Start" button twice (while continuing to hold down the odometer button). Watch the display . . . it will speak for itself.
No, it means that it's time to change oil or one of components has failed and has to be replaced.
You need a special computer for that. Check the gas cap first, make sure its tight, sometimes that sets it off.
maintenance with engine
To reset the maintenance required light on a 2013 Toyota Camry, first turn the ignition to the "ON" position without starting the engine. Then, press the gas pedal three times within five seconds. Finally, turn off the ignition and start the engine to check if the light has been reset. If it remains on, repeat the process to ensure it was done correctly.
This is how to reset "Maintenance Required" light on Toyota Camry with "Smart Key" feature.This works on 2007 and newer Camry models, including the Camry Hybrid. Put the odometer on "Trip A." Turn off the car, hold down the odometer button and, without putting foot on the brake, push "Start" button twice (while continuing to hold down the odometer button). Watch the display . . . it will speak for itself.
To reset the maintenance required light in a 1994 Toyota Camry, first turn the ignition switch to the "OFF" position. Then, while holding down the trip meter reset button on the instrument panel, turn the ignition to the "ON" position without starting the engine. Continue to hold the button until the maintenance light goes off, usually after a few seconds. Once the light is off, you can release the button and turn the ignition back to the "OFF" position.