Radio codes are set at the factory and cannot be reset. If you lost the code go to your dealer and have them look it up.
So the CODE word of the day is what?
4524
This is often a factory security setting, meant to be a theft deterant. Usually a dealer can reset it for you. There also may be a series of buttons (a code) you can push on the radio to reset it. Call your dealer or Daewoo tech support.
5624 for mine, but don't know if that will work for yours...
If you are looking for a specific code to unlock your radio, check your owners manual. Look in the manual under radio.
try theseh**p://wiki.answers.com/Q/What_is_the_code_to_unlock_the_radio_in_your_Daewoo_Lanoschange the ** to t
Either us an OBD2 (most auto parts stores have them) or remove the negative battery cable for a few min's. You will need to re-enter the code for your radio though
To reset the radio code in a Daewoo Tacuma, you typically need to turn on the ignition and then the radio. If the radio displays a "CODE" message, enter the correct code using the preset buttons. If you don’t have the code, you may need to consult your vehicle's manual or contact a Daewoo dealer for assistance, as they can provide the code based on your vehicle's VIN. Always ensure the vehicle is off before disconnecting the battery to avoid further complications.
To reset the radio code in a Daewoo Leganza, you typically need to locate the radio's serial number, which can usually be found on the back of the unit or in the vehicle's manual. Once you have the serial number, you can contact a Daewoo dealership or refer to the manufacturer’s website for the specific code associated with your radio. Alternatively, some aftermarket radios may allow you to reset the code by pressing a series of buttons, so consulting the radio's manual can also be helpful. If you're unable to retrieve the code yourself, a professional audio service can assist you.
you dont bring it in to the dealer the moduale is usually in the sterring colume and you have to take it apart to do this You can try disconnecting the battery for a min of 5 mins, make sure if your radio needs a code you have it
Turn the radio on. The led will read CODE. Input the four digits by touching each number on the radio/CD facade.
I had the same problem with mine, I found a web sit with all the codes, all I did was google "codes for daewoo radio" and I found it.