LX Models :
Press and hold the CLOCK (SCAN/
RPT) button. Change the hours by
pressing the H (preset 4) button
until the numbers advance to the
desired time. Change the minutes by
pressing the M (preset 5) button
until the numbers advance to the
desired time. When you are finished,
release the CLOCK button.
You can quickly set the time to the
nearest hour. If the displayed time is
before the half hour, pressing and
holding the clock button, then
pressing the RESET (preset 6)
button sets the clock back to the
previous hour. If the displayed time
is after the half hour, the clock sets
forward to the beginning of the next
hour.
For example: 1:06 will reset to 1:00
1:52 will reset to 2:00
EX and EX-L models:
The display shows the time when the
ignition is in the ACCESSORY (I) or
the ON (II) position.
Press and hold the SET (TUNE)
button until the numbers flash.
Change the hours by pressing the
H (-) button until the numbers
advance to the desired time. Change
the minutes by pressing the M (+)
button until the numbers advance to
the desired time. When you are
finished, press the SET button again.
On models with Navigation System:
Refer to the navigation system
manual for how to adjust the time.
To set the clock on a 2007 Honda Pilot with a navigation system, turn on the vehicle and press the "Menu" button on the navigation screen. Select "Settings," then navigate to "Clock." From there, you can adjust the time by using the touch screen or the corresponding buttons, ensuring you save the changes before exiting the menu.
To set the clock on a 2011 Honda Pilot, press the middle of the knob that adjusts the clock until you see the part that you need to change, such as the hour. Then, turn the knob until it gets to the correct time. Then, select "exit" to finish.
To set the clock in a 2011 Honda Pilot, turn on the ignition and press the "Menu" button on the dashboard. Use the navigation dial to select "Clock" and then choose "Set Clock." Adjust the hour and minute using the dial and confirm your settings. Finally, press the "Menu" button again to save the changes.
To set the clock on a 2007 Honda Jazz, start by turning the ignition switch to the "On" position without starting the engine. Press and hold the "Clock" button until the display begins to blink. Use the "H" and "M" buttons to adjust the hours and minutes, respectively. Once the correct time is displayed, press the "Clock" button again to set it.
To set the clock in a 2006 Honda Pilot, turn the ignition to the "On" position without starting the engine. Press and hold the "Clock" button until the display begins to flash, then use the "H" (hour) and "M" (minute) buttons to adjust the time. Once the correct time is set, press the "Clock" button again to finalize the setting. Ensure to check if the time reflects AM or PM correctly after setting.
To set the clock on a 2007 Honda Fit, first turn on the ignition or accessory mode. Press and hold the "Clock" button until the display begins to blink. Use the "H" (hour) and "M" (minute) buttons to adjust the time, then press the "Clock" button again to save the settings. Make sure to set the correct AM or PM as needed.
Hold AM button on radio. After 5 secs. Clock will blink and then use the disc plus and minus to adjust hour and seek + or - for minutes.
To set the clock on a 2001 Honda Passport, turn on the ignition and press the "Clock" or "Set" button on the stereo. Use the "H" (hour) and "M" (minute) buttons to adjust the time. Once the correct time is displayed, press the "Clock" or "Set" button again to save the settings. Make sure to check if the time is set correctly after adjusting.
To set the clock in a 2005 Honda Element, turn the ignition to the "On" position without starting the engine. Press and hold the "Clock" button until the hours begin to flash. Use the "H" (hour) and "M" (minute) buttons to adjust the time, and then press the "Clock" button again to confirm your settings. The clock will then be set to the new time.
You will need both hands to set the clock in the 2007 Chrysler 300. Hold the power button in and adjusts the time with the tuning knob.
To set the clock on a 2010 Honda Odyssey, first, turn on the vehicle and locate the clock display on the dashboard. Press and hold the "Clock" button until the time begins to flash. Use the "H" (hour) and "M" (minute) buttons to adjust the time accordingly, then press the "Clock" button again to save the settings.
This information can be found in the owner's manual.