0
On what model of car? On some Accords, you shouldn't need to remove too many things. You normally have to remove the ash tray. Also, there are a couple of screws that you have to reach from the back side from under the dash that you will need a socket wrench, an exension, and a universal joint adaptor to get to.
What else can I help you with?
How do you remove 2007 Mazda 6 stereo?
To remove the stereo from a 2007 Mazda 6, first disconnect the negative battery cable to ensure safety. Then, use a trim removal tool to gently pry off the dashboard panel surrounding the stereo, being careful not to break any clips. After removing the panel, unscrew the mounting screws securing the stereo, disconnect the wiring harness and antenna, and finally, pull the stereo out of the dashboard. Reverse the process to install a new stereo.
How do you remove a stereo from 1988 mercedes280e?
you must first take a screwdriver and pry off the dashboard. Then take the back end of a hammer, and remove the radio, while cutting through all the back wires. Put the dashboard back on, and your done!
How do you install stereo for 2001 Cadillac Catera?
buy a kit off the internet!
How do you remove the dashboard to replace the stereo in a 1999 sebring LXI coupe?
the panel around the stereo pops off. You can do it by hand or use a flat head screwdriver.
How do you remove the factory stereo on a 2008 Dodge Ram 1500?
There are a few screws in the dashboard and some clips holding the dash in place. Take those out and just pull the dash off. Then the stereo is screwed in to the frame. Unscrew it, unplug it, and you're good to go.
How do you change the bulbs for the instrument panellights for an Acura Integra?
Changing the instrument panel lights require removal of the dashboard. With the dashboard removed pull the gauge cluster out and take off the bulbs. Install the new bulbs.
How do you remove the stereo in a 2003 Suzuki Grand Vitara XL7?
To remove the stereo in a 2003 Suzuki Grand Vitara XL7, start by disconnecting the negative battery terminal to ensure safety. Use a flathead screwdriver to carefully pry off the trim panel surrounding the stereo, then remove any screws securing the stereo in place. Once the screws are removed, slide the stereo out of the dashboard and disconnect the wiring harness and antenna cable from the back. Finally, install the new stereo by reversing these steps.
How do you install a stereo in a 1998 Chevy Cavalier?
take the old one out by opening the glove compartment and taking the two screws out and take that part of the dash off and take the two screws off the stereo and disconnect the antenna and wire harness buy a installation kit and a antenna adapter and a wire harness and match the wires from new stereo to the wire harness the instructions are all there with the kit i think any store that sells stereos has these kits it will only take about about hour and a half
How do you change a factory stereo in your 2004 Hyundai Elantra?
take the ashtray out, and pull out the dashboard, be carefull not to brake the plastic clips. There are 5 screws in the dashboard, remove them, you may have to turn the car on and move the stick shift out of the way, use the emergency brake while doing this. It's not easy, you may need a second set of hands but I did it twice, the first time my car got broken into and thru the window they stole my off market stereo, now i take to cover off when I park in the city.
On 95-99 Monte Carlo how do you take out the stereo?
first you take off the plastic part of the dashboard that goes around the radio and s/c vents as well as around the steering wheel (it just pops off). there are two screws holding the stereo in, remove those screws, pull out, and unplug.AnswerYou can just pull the trim dash off around the stereo and dash. You will need a Phillips screwdriver and there are two screws one on each side. Unscrew, detach the wire harness and viola. Hope this helps debbie
How do you take out the factory stereo in a 2000 grand am?
To remove the factory stereo from a 2000 Pontiac Grand Am, start by disconnecting the negative battery cable to ensure safety. Use a flathead screwdriver or a trim removal tool to carefully pry off the plastic trim surrounding the stereo. Once the trim is removed, unscrew the mounting screws holding the stereo in place, and gently slide the stereo out of the dashboard. Finally, disconnect the wiring harness and antenna from the back of the stereo to complete the removal.
How do you remove car stereo from Nissan Armada?
To remove the car stereo from a Nissan Armada, first, disconnect the negative battery terminal to ensure safety. Next, use a trim removal tool to gently pry off the dashboard trim surrounding the stereo, being careful not to damage the clips. Once the trim is removed, unscrew the mounting screws securing the stereo and then slide it out of the dashboard. Finally, disconnect the wiring harness and antenna cable from the back of the stereo.
