answersLogoWhite

0

At the back of the mirror you will find a rubber stopper. The stopper is same color as the mirror. Remove that stopper and it will reveal a screw. Tighten the screw to adjust. Be careful not to remove the screw. If you do you will have to open up the mirror to catch it back.

Also, depending on how flexible you are and the length of your screwdriver, you may need to remove the mirror. Use a screwdriver to pry out the plastic cover and and you will see all three screws holding the mirror to the roof.

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

How do you tighten a loose electrically operated side mirror on a 1999 F-150XLT?

To tighten a loose electrically operated side mirror on a 1999 F-150 XLT, first, carefully pry off the mirror cover, if applicable. Locate the screws or bolts securing the mirror assembly to the door; these may be accessible from behind the mirror. Use a screwdriver or socket wrench to tighten them securely. Finally, reattach the mirror cover and test the mirror's stability.


How do you replace a rear view mirror in 1999 Acura RL?

To replace the rearview mirror in a 1999 Acura RL, first, remove the plastic cover at the base of the mirror by gently prying it off. Next, unscrew the mirror from its mount using a Phillips screwdriver. Install the new mirror by aligning it with the mount and securing it with the screw. Finally, reattach the plastic cover for a finished look.


How do you replace a rear view mirror on a 1999 Jaguar XK8?

To replace the rearview mirror on a 1999 Jaguar XK8, first, carefully pry off any plastic cover concealing the mounting bracket. Then, use a Torx screwdriver to remove the screws holding the mirror in place. Disconnect the electrical connector if your mirror has features like auto-dimming. Finally, install the new mirror by reversing the steps, ensuring it's securely attached and reconnecting any electrical connections.


How do you replace the interior rear view mirror for a 1999 Lexus rx 300?

To replace the interior rearview mirror on a 1999 Lexus RX 300, start by gently prying off the plastic cover at the base of the mirror if applicable. Use a screwdriver to remove the mounting screws holding the mirror to the windshield bracket. Disconnect any wiring harness if your mirror has features like auto-dimming. Finally, attach the new mirror by reversing the steps, ensuring it is securely mounted, and replace the plastic cover if necessary.


How do you reattach a rear view mirror on a 1999 jeep wrangler?

You can get a mounting kit from the parts store, the metal piece comes out of the mirror by loosening an allen screw, glue the mount to the window as per instructions and when it is set slide the mirror on and tighten set screw.


Can you use a 1999 infiniti g20 rear bumper cover on a 2000 infiniti g20?

Yes. The rear bumper cover was the same on the Infiniti G20 from 1999-2002.


How do you disarm the alarm in your 1999 infiniti g20 it wont start?

Need help to disarm the alarm on 1999 infiniti g20


How do you replace a rear view mirror in an 1999 Intrigue can't get the button off the mirror?

I have a 1999 Oldsmobile Intrigue. The rearview mirror on my car has twin maplights, and on the back it says "Donnelly IE 8012001". I just re-glued my mirror to the windshield after it fell off. Some other cars use a screw to attach the button to the mirror, but this mirror does not. Instead, I used a flat-head screwdriver to pry the button out of the mirror -- be careful to not to hurt yourself or the mirror. After prying the button out, I studied the mirror, and there doesn't appear to be any other way to remove the button. When gluing the button to the windshield, be careful to figure out which side and orientation the button needs to face before gluing it to the windshield.


Does 1999 Infiniti I30 have a timing belt or chain?

The 3.0 litre V6 engine in a 1999 Infiniti I30 has a timing CHAIN


How do you replace the rear view mirror for a 99 4runner?

To replace the rearview mirror on a 1999 Toyota 4Runner, first, carefully remove any plastic covers or trim around the mirror. Use a Phillips screwdriver to unscrew the mirror from its mounting bracket on the windshield. Disconnect any wiring for features like auto-dimming if applicable, then attach the new mirror by reversing the process—screw it into the bracket and reconnect any wiring. Finally, replace any trim or covers you removed.


Where is iat sensor on 1999 infiniti QX4?

where is the IAT sensor located on 99 qx4 infiniti


How do I change the dash speaker in my 1999 Dodge Intrepid es?

in the door (6 1/2) then theres tweeters on the inside part of the mirror (only with infiniti system only) then theres 2 6x9 in the back