Timing marks determine if the car is set on TDC(Top Dead Center). Just to make sure it is in time use a Timing Light. The timing marks are located on the sprocket under the valve cover and on the crankshaft. Timing marks determine if the car is set on TDC(Top Dead Center). Just to make sure it is in time use a Timing Light. The timing marks are located on the sprocket under the valve cover and on the crankshaft.
no it cant as, as long as the light isn't on
with a timing light....10 degrees
how to set timing on ford 1987 f-100 302 without timing light
It's below the light silver peice, under the right side of the engine bay.
In stock form? Not. I've owned 4 s13s and I now own an s14, and I can tell you that 240s aren't really made to go fast in straight lines without a bunch of modifications. Where the 240sx really shines is its handling and reliability. They're very fun cars to have, but for screwing around and racing other kids from light to light, there are better cars.
The backup light switch for the reverse lights on a 1990 Nissan 240SX is typically located on the transmission. It is mounted on the side of the transmission case, near the reverse gear. To access it, you may need to lift the vehicle and remove any obstructing components. Checking the vehicle's service manual can provide specific details on its exact position.
You dont they are meant to be in the car for the life of the engine. But you can buy a timing light and check the timing.
behind the plastic in the passenger side foot space on the right (behind the light) there are 3 screws holding the plastic on
To set the timing on a 1996 Nissan 200SX using a timing light, first, ensure the engine is at operating temperature and the ignition timing connector is shorted (usually located near the ECU). With the engine running, point the timing light at the crankshaft pulley to see the timing marks. Adjust the distributor by loosening its bolts and rotating it until the timing mark aligns with the specified degree on the timing scale. Finally, re-tighten the distributor bolts and disconnect the timing connector.
one screw holds the light on, take it off and spin the light lens holder to remove the bulb
If the room light fuse in your 1991 Nissan 240SX keeps blowing, it may indicate a short circuit or a malfunctioning component in the circuit. Check the wiring and connections leading to the light for any signs of damage or fraying. Additionally, inspect the light fixture itself for any faults. If everything appears intact, consider replacing the fuse with the correct amperage and monitor for any further issues.