A Lexus ES 350 tire pressure light will reset on its own. Tire pressure lights will turn off when the tire is at the proper pressure.
First of all check the spare tire pressure.
Correct the tire pressure.
It should turn off automatically after you put in the correct tire pressure. I just did this the other day.
Inflate the tire to the correct pressure and then drive the vehicle
The system can not be disabled.
Your vehicle is equipped with a Tire Pressure Monitoring System (TPMS) that monitors the tire pressure of all tires except the spare. The low tire pressure warning light warns of low tire pressure or indicates that the TPMS is not functioning properly. After the ignition switch is turned ON, this light illuminates for about 1 second and turns off. Low tire pressure warning: If the vehicle is being driven with low tire pressure, the warning light will illuminate. When the low tire pressure warning light illuminates, you should stop and adjust the tire pressure to the recommended COLD tire pressure shown on the Tire and Loading Information label. The low tire pressure warning light does not automatically turn off when the tire pressure is adjusted. After the tire is inflated to the recommended pressure, the vehicle must be driven over 16 MPH (25 km/h) to activate the TPMS and turn off the low tire pressure warning light. Use a tire pressure gauge to adjust tire pressure to the recommended pressure. TPMS malfunction: If the TPMS is not functioning properly, the low tire pressure warning light will flash for approximately 1 minute when the ignition switch is turned ON. The light will remain on after the 1 minute.
The light should turn off after the tire(s) is inflated
Inflate your tires to the proper pressure and then drive the vehicle
To turn off the tire pressure light on a BMW 128i, first ensure that all tires are properly inflated to the recommended pressure. After adjusting the tire pressures, start the vehicle and press the "BC" button on the turn signal stalk until you see the tire pressure monitor menu. Select "Reset" or "Initialize" to recalibrate the system. If the light remains on, it may indicate a tire issue or a malfunction, and you should consult a professional.
To reset the tire pressure light on a 2016 Scion iA, first ensure that all tires are properly inflated to the recommended pressure. Then, turn the ignition to the "ON" position without starting the engine. Press and hold the tire pressure warning reset button, usually located beneath the steering column, until the tire pressure light blinks three times, then release it. Start the engine, and the light should turn off if the tire pressures are correct.
In general, you can't.