Fill washer resevoir - if it does not shut off possiby a bad sensor
Assuming you mean the low windshield washer fluid indicator, by just filling the reservoir with windshield washer fluid, the light should turn off. If not, the low washer fluid sensor may be faulty.
Check for a broken/damaged wire on the sensor that is near the bottom of the washer tank.
If the sensor is functioning properly, when you add the washer fluid the light should turn off automatically; no additional action required.
To get water for the windshield, you typically need to press the windshield washer control, which is usually a lever or button located on the steering wheel or the turn signal stalk. This action activates the windshield washer pump, sending washer fluid through the nozzles onto the windshield. Make sure the washer fluid reservoir is filled for it to work effectively.
They come on when you turn on the windshield washer, but only when the headlights are turned on.
To reset the low washer light on a 2004 Lincoln Town Car, first ensure that the windshield washer fluid reservoir is filled. Then, turn the ignition key to the "On" position without starting the engine. Press the accelerator pedal three times within five seconds, which should reset the warning light. If the light remains on, check for any leaks or issues with the washer system.
Your headlight wipers should come on when you spray your windshield washer fluid.
It wouldn't be a good idea. Windex will streak, severely, in turn impairing your vision through the windshield.
The second pump supplies the rear window. Do you hear a pump running when you turn the switch on for the windshield washer?
pull the lever toward the steering wheel
The multi function switch is the lever for your turn signals , windshield wipers , washer etc .
You need to refill the container with windshield fluid. If you do so, the light will go off.