0
Plan on a day of fun! The front three spark plugs are easy to get to; it's those back three. You have remove the black plastic air exchanger(?) on top of the engine. This is not easy. The bolts are in back where you can't see them and you don't have a lot of room to get a socket in there. Once you get that off, then you can get to the back plugs. Again, not easy to see, hard to access, especially number 5. Then, once you finally have the spark plugs changed, you have to put it all back togeth with the bolts going in where you can't see and can't get to very easy. But with enough stubborness, it can be done. Good luck!
What else can I help you with?
Changing spark plugs 2005 Mitsubishi endeavor and what brand of spark plugs are recommended?
NGK platinum plugs
How many spark plugs are on a 2006 Mitsubishi endeavor?
Six
How do you change the spark plugs on a Mitsubishi Endeavor?
Well the v6 engine will require you to take the intake off to get to the rear plugs but other than that it is pretty much the same
Where are the sparkplugs in a 06 Mitsubishi endeavor?
In a 2006 Mitsubishi Endeavor, the spark plugs are located on the engine, accessible by removing the engine cover and the ignition coils. The Endeavor is equipped with a V6 engine, so there are six spark plugs, one for each cylinder. Each spark plug is situated on the top of the engine, connected to the ignition coil, which needs to be removed to access the plugs for replacement or inspection.
How do you change spark plugs for a 2003 Mitsubishi galant spark plugs?
2002 galant , can't find the spark plugs
How do you change spark plugs on a 2000 Mitsubishi diamante?
you have to remve the intake manifold
How often to change spark plugs in 2000 Mitsubishi eclipse?
Every 30,000 miles except platinum plugs
Changing the spark plugs on a 2006 galant?
how to change number 6 spark plug on a 2006 mitsubishi galant
How do you Change spark plugs for 2005 Mitsubishi galant V6?
You must remove the entire intake manifold for you to have access on the three spark plugs located underneath it. it is advisable that a qualified Mitsubishi technician should do this.
What is the gap for the spark plug on a Mitsubishi Endeavor?
GAP:044
How do you change spark plugs on a 2000 Mitsubishi Lancer?
To change the spark plugs on a 2000 Mitsubishi Lancer, first, ensure the engine is cool and disconnect the negative battery terminal. Remove the ignition coil or spark plug wires to access the spark plugs, then use a spark plug socket and ratchet to unscrew and remove the old plugs. Check the gap on the new spark plugs, install them carefully, and torque them to the manufacturer's specifications. Finally, reconnect the ignition components and the battery terminal.
When do you change your spark plugs?
when do you change spark plugs
