Yes the 1997 Toyota Camry has a metal screen filter inside of the transmission pan on the bottom of the transmission, you will have to remove the bottom transmission to get to the filter, because the filter is a metal screen you do not have to replace the filter, you can clean the filter and reuse it
To change the transmission filter on a 2002 Toyota Tacoma with an automatic transmission, first, ensure the vehicle is on a level surface and securely raised. Drain the transmission fluid by removing the transmission pan, then remove the old filter and replace it with a new one. Clean the pan and replace the gasket before reinstalling it, making sure to torque the bolts to the manufacturer's specifications. Finally, refill the transmission with the recommended fluid type and check the level.
14mm
Simply remove transmission oil pan and it's right there all you have to do is remove and replace.
Yes, but you have to remove the automatic transmission housing, and you have to replace the Torque Converter with a standard transmission clutch that matches the type of transmission with which you are mating the engine.
Check
Remove the Ford Ranger automatic transmission drain plug. The drain plug is in the bottom of the transmission. Allow the oil to drain out and replace the plug. Fill the transmission with new transmission fluid.
Automatic transmission oil filters ware located inside the transmission, under the transmission oil pan. You have to remove the transmission oil pan to replace it and then you will need to refill it with new transmission fluid.
Remove the engine and drive shaft
Its a 10mm Allen Key.
Remove transmission oil pan Replace fluid, filter, and gasket
To change the automatic transmission fluid on a 2002 Toyota Highlander, start by warming up the engine and then turn it off. Place a drain pan under the transmission pan, remove the pan bolts, and allow the old fluid to drain completely. Replace the transmission filter if applicable, clean the pan, and reinstall it with a new gasket. Finally, fill the transmission with new fluid through the dipstick tube, using the recommended type and amount, and check the level with the engine running.