The cooling fan for a Toyota MR2 typically draws around 10 to 15 amps, depending on the specific model and year. It's important to check the owner's manual or specifications for the exact amperage, as it may vary slightly between different versions of the MR2. Additionally, factors like fan condition and ambient temperature can influence its power draw.
A ceiling fan typically uses around 0.5 to 2.5 amps of electricity.
A ceiling fan typically uses around 0.5 to 2.5 amps when in operation.
cooling fan relay has gone bad or coolant temp sending unit is bad
The cooling fan light on your dash refers to the engine compartment cooling fan on the passenger's side of the vehicle, not the radiator cooling fan. In my experience with my '85 Mr2, that fan doesn't do a helluva lot, cuz mine only works if I unplug the temp sensor (sensor's dead and I don't wanna replace it) and I've never had a problem with overheating.
1100 watts or about ten amps then another 3 to 4 amps for turn table light and fan
The equation you are looking for is Watts = Amps x Volts.
The amperage of a PCU fan can vary depending on the specific fan model. On average, a typical PCU fan can consume anywhere from 0.2 to 0.5 amps of current. It's important to check the manufacturer's specifications for the exact amperage of the fan you are using.
The amp draw of a floor fan typically ranges from 0.5 to 3 amps, depending on the size and power of the fan. Smaller, portable fans generally use less power, while larger, more powerful fans can draw more amps. To find the exact amperage, check the fan's specifications or the label on the power cord.
A typical box fan usually pulls between 0.5 to 2.5 amps, depending on its size and speed settings. Smaller models generally consume less power, while larger or more powerful fans may draw more amps. To determine the exact amperage for a specific fan, it's best to check the manufacturer's specifications or the label on the fan itself.
If needed there is a diagram on the top of the radiator fan itself. Rather on the top of the guard next to the radiator.
How do you change a fan belt for a 2000 Toyota Avalon
To calculate the amperage, you need to know the voltage at which the fan operates. Generally, for common household appliances, the voltage is around 120V in the US. Using the formula Power (W) = Voltage (V) x Current (A), for a 90W fan operating at 120V, the amperage would be approximately 0.75A.