0
What else can I help you with?
Where can you find a 1988 Suzuki Samurai transfer case?
at the wrecking yard
Where can I find a Suzuki Samurai transfer case diagram?
See the related link below.
What does it mean when Suzuki samurai Goes into gear but does not move?
Your transfer case may be in neutrual.
Parts for 1988 suzuki samurai transfer box?
trailtough.com lowrange.com both sell parts for transfer case.
Will a transfer case from a manual fit on an automatic for a suzuki samurai 1986?
Depends when the manual's from- but probably not.
Is there a spring under the cap of the shifter holding the shifter in place on the transfer case on the suzuki samurai?
Yes, a spring is located there. Download the FREE Suzuki Samurai Shop Manual from http://www.suzukiinfo.com/ or visit zukikrawlers.com zn
Why wont your suzuki samurai go into 2 hi?
the shifter sheet needs replaced this can be done without removing the transfer case
Any tricks to towing a '88 Suzuki Samurai 4x4?
Put the transfer case into neutral and the main box into fourth. Release handbrake.
Suzuki samurai transfer case popping out of 4wd Hi to 2wd?
If your Suzuki Samurai's transfer case is popping out of 4WD Hi to 2WD, it may indicate an issue with the shifter linkage, worn components, or improper engagement of the transfer case. Check for any loose or damaged linkage that may prevent secure engagement. Additionally, inspect the transfer case for internal wear or damage and ensure that the fluid levels are adequate. Adjustments or repairs may be necessary to ensure proper operation.
Speedometer cable diagram for 1988 Suzuki Samurai?
They don't allow pasting pictures in here. The speedometer cable goes from the transfer case to the speedometer.
What type of gear oil does a suzuki samurai transmission and transfer case need?
80W90 in both use lucas or some type of synthetic like redline.
Why won't my suzuki samurai go into 4 low?
If your Suzuki Samurai won't engage in 4 Low, the issue could stem from a few common factors. First, ensure that the transfer case is fully engaged by fully pressing the clutch and shifting into neutral before attempting to switch. Additionally, check for any linkage issues or damage, as well as low fluid levels in the transfer case. If these areas are fine, the problem may lie within the transfer case itself, which could require professional inspection or repair.
