4
4
There are 3 oxygen sensors on this vehicle. Some of the Highlanders with California emissions have 2 fron Air/Fuel Ratio sensors and one rear Oxygen sensor.
To change the oxygen sensors on a 2001 Toyota Corolla S, first, ensure the vehicle is off and cool. Locate the oxygen sensors; there are typically two, one before the catalytic converter (upstream) and one after (downstream). Disconnect the electrical connectors and use a wrench or oxygen sensor socket to unscrew the old sensors. Install the new sensors by reversing the process, ensuring they are securely tightened and properly connected.
You have two oxygen sensors in Toyota Rav4, One before the catalytic converter and another after.
There are 3 oxygen sensors; one in the front exhaust manifold, one in the rear exhaust manifold, one AFTER the catalytic converter. The 2 exhaust manifold sensors are the same BUT the catalytic converter one is different. Also, the 2 exhaust manifold sensors have heaters in them, while the converter one doesn't.
In the manifolds - sometimes difficult to get at.
On a 2003 Toyota Highlander, the oxygen sensors are located in two main areas: one before the catalytic converter (upstream) and one after it (downstream) for each bank of the engine. For the V6 engine, you'll find the upstream sensor on each exhaust manifold, while the downstream sensors are located in the exhaust pipe after the catalytic converter. If you're working on the vehicle, ensure to access them from underneath the car or through the engine bay, depending on their location.
where are the oxygen sensors on a 2000 Pontiac grand am and how do you change them?
2
none
3