answersLogoWhite

0

I followed the instructions (pg # 282) in the manual and I was able to remove the passenger/navigator side headlight. Just in case you don't have the manual : Picture in the manual is helpful but here are the instructions given in the manual. 1. Open the hood If you need to change the head-light bulb on the driver side, remove the air intake cover (see page 262).

2. Remove the electrical connector from the bulb by pulling the connector straight back. 3. Remove the rubber seal by pulling on the tab. 4. Unclip the end of the hold-down wire from its slo. Pivot it out of the way and remove the bulb. 5. Insert the new bulb into the hole, making sure the tabs are in the their slots. Pivot the hold-down wire back in pplace and clip the end into the slot. 6. Install the rubber seal over the back of the headlight assembly. Make sure it is right side up; it is marked "TOP". 7. Push the electrical connector onto the new bulb. Turn on the headlights to test the new bulb. 8. (Driver's side)

Reinstall the air intake cover.

User Avatar

Wiki User

17y ago

What else can I help you with?