I have an '01. I use this feature during slippery weather. I believe it starts the tranny in second gear to avoid rear wheel slipping.
the console has to be removed to get to it.
When a console light flashes on a Mitsubishi?æand the light continues to flash that may mean a sensor needs to be replaced. A certified mechanic can have it replaced.
Gain access to the back of the console and screw the retainer back on to the receptacle.
undo console from the floor to get to it.
My mechanic and I found the answer to this one by trial and error. First, pull out the instrument console. It's only a few screws but be careful because you don't have a lot of room to work. On the left side of the console, (in the back) between the speedometer and the edge of the console, you'll find a VERY small switch. Move it to another position (doesn't really matter which one) and the light should go out.
ecu is in the centre console behind the stereo
reddog: Can not find out how to get to the back of power outlet to unscrew it and replace it with a cigarette lighter.
The 1997 Mitsubishi Diamante OBD 2 port is under driver side dash next to center console
The 2001 Mitsubishi Eclipse OBD 2 port is under driver side dash next to center console
The 1996 Mitsubishi Galant OBD 2 port is on lower edge of drivers dash next to center console
The fuse is ok but the lighter won't work.