I have a 2003 Outlander and tail light is similar- check out the WikiAnswer for the 2003 which helped me remove my tail light assembly.
Use a chainsaw
pray
http://www.installer.com/pdf/99-7013.pdf
you need to drop the drive shaft, and rear axle to pull the gas tank out. don't forget to replace the fuel pump while the tank is removed.
remove heater bezzel (remove knobs and remove two Philips screws.) just pull out, do not remove. then unclip and remove stereo bezzel.
To change the parking light on a Mitsubishi Outlander, first, ensure the vehicle is turned off and the keys are removed. Open the hood and locate the headlight assembly; you may need to remove a cover or fastener. Twist the socket counterclockwise to remove it, then pull out the old bulb and replace it with a new one, ensuring it’s securely in place. Finally, reinsert the socket into the assembly and close everything up.
To remove the roof racks from a 2008 Mitsubishi Outlander, first, locate the plastic covers at the ends of the racks and carefully pry them off to expose the mounting bolts. Use a socket wrench to unscrew the bolts securing the roof racks to the vehicle. Once the bolts are removed, gently pull the racks off the mounting points. Finally, replace the plastic covers to ensure a clean look on your vehicle.
To remove the headlight on a 2006 Mitsubishi Outlander, first, open the hood and locate the headlight assembly. Remove the screws or bolts securing the assembly—typically found at the top and side. Gently pull the assembly forward to disconnect it from the clips, then disconnect the wiring harness. Finally, you can replace the bulb or the entire assembly as needed.
the fuse box legend is on the back of the tray drawer you remove to get to the fuse box.
On a outlander 20003 you need "carefully" to remove the left plastic pin inside the glove compartment, then you can easily unhook the right pin which is attached to the compartment. Drop it all way down and remove the compartment.
To remove the car stereo from a 2014 Mitsubishi Outlander Sport, start by disconnecting the negative battery terminal to ensure safety. Then, use a trim removal tool to carefully pry off the surrounding dash panel and any screws securing the stereo in place. Once the screws are removed, gently pull the stereo out and disconnect the wiring harness and antenna cable from the back. Make sure to keep track of all screws and clips for reassembly.
To remove the roof rack on a 2003 Mitsubishi Outlander, start by locating the mounting bolts or screws that secure the rack to the roof. Use a suitable socket wrench or screwdriver to carefully unscrew them. Once the bolts are removed, gently lift the roof rack off the vehicle. It’s advisable to have a second person help hold the rack to prevent any damage during removal.