power window motor removal 93 sunbird
See if theres a shop manual at the library for free. d
check your fuses, if not, replace the window motor located in the door.
un plug the connector at the window regulator, check for 12V, if you have it when you press the switch up or down, its your regulator, if not it mat be the window switch or a problem further up a wiring diagram Justin
You will have to remove the door panel and replace the regulator assembly. In some cases it comes as an assembly with the motor.
how do you check to know whether your coolant fan motor needs replacing in my 1993 toyota camry v6?
To replace the window motor in a 1993 Pontiac Grand Prix LE, start by removing the door panel to access the motor. Disconnect the wiring harness from the old motor, then unbolt it from the door frame. Install the new motor by securing it in place and reconnecting the wiring harness, then reassemble the door panel. Test the window to ensure it operates correctly before finishing up.
The estimated cost for parts and labor to replace the clutch on a 1993 Toyota Camry is between $1,260 and $1,687. This can be higher or lower depending on where a person lives.
The outer and inner door panels on the door must come off. FRom there you have access to the rivets holding the motor to the door. Break the rivets and replace with the new motor. The new motor should come with bolts if from the dealer.
Most likely the window motor is dieing. If you want to replace it you can. It is not easy but it is possible to fix. Remove the door panel. Find the motor and drill out the rivets or get the old motor out by any means necessary. Unplug the motor Bolt in your new window motor and plug it back it. Before you replace the door panel, turn your car back on and make sure that the window motor is working. If it works replace the door panel. If not check the fit of the motor and the wiring. takes about 3 hours your first time if you have all the tools you need and know how to get the door panel off.
Replace valve seal
Pop the cover off by pulling at the corners away from the window, pull the tabs on the light shield, and replace the bulb with a 912 light bulb.