To turn off the timing belt light on a Toyota Hilux, first ensure that the timing belt service has been completed. Then, use an OBD-II scanner to reset the service light, or if you don't have one, turn the ignition to the "On" position without starting the engine and press the gas pedal three times. This should reset the light. If the light persists, consult a mechanic for further diagnostics.
timing belt light hilux 1kd
how to reset toyota kdn165 timing light
it not a belt its a chain assembly.
see hpoc.co.uk for a post on this very question
To turn off the timing belt light on a 1993 Toyota Hilux, first, ensure that you have completed any necessary maintenance related to the timing belt. Then, disconnect the negative battery terminal for about 10-15 minutes to reset the system. Reconnect the battery, and the light should be off. If the light remains on, consult a mechanic for further diagnostics.
To reset the timing belt light on a 2000 Toyota Hilux D4D, you typically need to locate the trip meter reset button on the dashboard. Turn the ignition key to the "ON" position without starting the engine, then press and hold the trip meter reset button until the timing belt light turns off. If the light does not reset, you may need to disconnect the battery for a few minutes and reconnect it. Always consult the owner's manual for specific instructions related to your model.
If your timing belt light is on in your Toyota Land Cruiser then you need to take it to get serviced. The light could be warning you about a problem with the belt.
To reset the timing belt light on a 2003 Toyota Hilux 2.8 diesel, first, turn the ignition key to the "ON" position without starting the engine. Then, press the gas pedal three times within five seconds to reset the light. Turn off the ignition and then start the engine to ensure the light is reset. If the light remains on, you may need to consult the vehicle's manual or a professional mechanic for further assistance.
there is a little bung on your dash board beside your trip meter pull out bung and deep in there you will see a little button get a needle and push the button easy as that timing light out
2008 1.6 petrol toyota avensis timing belt or chain ?
To reset the engine timing belt on a 5L Toyota Hilux, first, ensure the engine is off and cool. Remove any components obstructing access to the timing belt cover, then carefully mark the position of the crankshaft and camshaft pulleys. Loosen the tensioner and remove the old timing belt, then install the new belt, ensuring it aligns with the timing marks on the pulleys. Finally, recheck the alignment, adjust the tensioner, and reassemble any removed components.
how to reset the vigo timing belt warning light