After you have removed the two metal clips behind the glove box, removed the cover and rubber gasket as well as the two part filter(2001 Forester) you can pass a long pipe cleaner through the drain into and through the rubber hose. The drain hole is at the front end of the plastic filter housing at it's base. If the pipe cleaner is long enough( a child's fluorescent model that they use for construction projects is long ) it will appear at the end of the hose where it exits near the base of the firewall.
The hardest part is probing for the opening at the base of the plastic housing since you can't see it unless you have a fiber optic device. Borrow your doctor's colonoscope and you've got it made. Good Luck!
The 2002 Subaru air conditioning drain line can be found on the bottom of the air conditioner compressor. The air conditioning drain line routes condensation to the bottom of the engine compartment.
A wrench
Remove the plastic shield marked: "oil filter and oil drain" on the splash guard under the motor.Easy to reach easy to change.
The 1998 Subaru Forrester does not have a drain plug on the bottom of the fuel tank. You can drain the fuel from the fuel tank by removing the fuel line.
Dexron III. It will take around 4 quarts if you drain using the drain plug on the transmission driver's (left) side.
15mm for top and bottom. Bottom one has a magnetic plug - check it for metal shavings.
To replace the thermostat in a Subaru Forester, first ensure the engine is cool and disconnect the negative battery terminal. Drain the coolant, then remove the upper radiator hose and the thermostat housing, which is typically secured by bolts. Take out the old thermostat, clean the mating surfaces, and install the new thermostat with a new gasket. Reassemble the housing and hose, refill the coolant, and check for leaks before reconnecting the battery.
It's a 17mm, but you could have discovered that by trying wrenches or sockets until one fit. --Ken
The AC drain on a 2008 Subaru Outback is typically located on the passenger side of the vehicle, underneath the dashboard. You can find it protruding from the firewall area, allowing condensation from the air conditioning system to drain outside. If you're experiencing water accumulation inside the car, it may indicate that this drain is clogged and needs to be cleared.
To effectively clean and maintain your air conditioning system's drain hose, you can use a mixture of water and vinegar to flush out any clogs or buildup. You can also use a pipe cleaner or a wet/dry vacuum to remove any debris. Regularly checking and cleaning the drain hose can help prevent clogs and ensure your air conditioning system works efficiently.
The house air conditioning drain pipe can be unclogged using pincers made especially for that pipe. A hardware store sells a type of pincer that has a telescoping end to reach into tiny spaces to clean out debris.
To effectively clean out your AC drain line and prevent clogs, you can use a mixture of vinegar and water to flush out any debris. You can also use a wet/dry vacuum to suction out any blockages. Regular maintenance and cleaning of the drain line will help ensure proper functioning of your air conditioning system.