25-30 lb-ft
80 foot pounds
1.6 1.8 2.0Ltr All 120/130Nm.
The tie-rod end jam nut needs to be toqued to 37 to 41 FT-LBS
The lug nut torque specification for a 2013 Hyundai Elantra is typically 80-100 ft-lbs (foot-pounds). It's important to use a torque wrench to ensure that the lug nuts are tightened to the correct specification for safe wheel installation. Always consult the owner's manual or a service manual for the most accurate information.
The oil drain plug torque is 65ft lbs
The torque specs on the valve cover bolts on a 1999 Hyundai accent are 71 to 89 INCH pounds or 8-10 N.m.
The caliper bolt torque specifications for a 2009 Hyundai Elantra Touring are typically around 79-94 lb-ft (107-127 Nm). It's important to consult the vehicle's service manual for the most accurate specifications, as these can vary slightly based on specific model configurations. Always ensure to use a calibrated torque wrench for proper installation.
The cylinder head bolts need to be torqued at * 10MM bolts 22 FT-LBS * 12mm bolts 26 FT-LBS
106
80 lbs
For the Hyundai Elantra 2.0L engine, the torque specification for the main bearing caps is typically around 47 lb-ft (64 Nm). It's important to follow the specific sequence outlined in the service manual to ensure proper installation. Always consult the vehicle's official repair manual for the most accurate and detailed information, as specifications can vary by model year.
Called a Hyundai dealer and got the answer. 80 foot pounds