answersLogoWhite

0

2000-03 (VX Series) 1. With the ignition OFF, press and hold the up and down buttons of the Trip Computer. 2. Turn the ignition ON while holding down both buttons. 3. Keep both buttons held in for 3 seconds approx. and then release both buttons. 4. Press and release the 'Mode' button (The service due screen appears on the display). 5. Press and hold both the up and down buttons for 3 seconds approx. until a beep is heard. 6. Release both buttons. 7. Switch ignition OFF. 2002-03 (VY Series) 1. With the ignition OFF, press and hold the up and down buttons of the Trip Computer. 2. Turn the ignition ON while holding down both buttons. 3. Keep both buttons held in for 3 seconds Approx.. 4. The service menu appears and asks if you want to reset. 5. Press and hold the 'Set' button for more than 3 seconds. 6. Press the 'Mode' button. Switch ignition OFF. 2004-06 (VZ Series) 1. With the ignition OFF, press and hold the up and down buttons of the Trip Computer. 2. Turn the ignition ON while holding down both buttons. 3. Keep both buttons held in for 3 seconds Approx.. 4. Press and hold the 'Set' button for more than 3 seconds or until an audible alarm is heard. 5. The display shows - SERVICE RESET NO ITEMS. 6. Press and hold the 'Set' button for more than 3 seconds - the SERVICE OIL LAMP will extinguish. 7. Turn the ignition OFF, then ON again. 2006-07 (VE Series) 1. Switch ignition off. 2. Press and hold the "Trip" button. 3. Switch ignition on. 4. Release the "Trip" button to enter the Service Reset Screen. 5. Once in the Service Reset Screen, press and hold the "Enter" switch for 3 to 5 seconds (a beep will sound as confirmation of reset). 6. Switch ignition off. 7. Should the service reminder come back on when the vehicle starts, repeat the procedure.

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

When was Holden VZ Commodore created?

Holden VZ Commodore was created in 2004.


How do you remove Window Winder VZ Commodore?

How to remove Window Winder Handles from VZ Holden Commodore


How much power does a Holden Commodore SV6 have?

if its a VZ model, then its 190kw if its a VE model, then its 195kw


Where is fuel filter on a Holden vz commodore?

under the car at the back near the fuel tank


Which coolant to use on Holden VZ commodore?

purple it smells like grape you can drink it aswell : )


Wiring diagram vz sv6?

Wiring diagrams for the Holden Commodore VZ SV6 are available at most major auto parts stores. Often, they can be found in do-it-yourself manuals.


Where is the ecu located on vz holden?

In a VZ Holden, the Engine Control Unit (ECU) is typically located under the dashboard, near the driver's side. It can be found mounted on or near the steering column or behind the glove compartment. Accessing it may require removing some panels for better visibility and reach.


Installing a tacho into a vz commodore?

The easiet way is to buy a instrument cluster with RPM's on it and have it configured by a Holden dealer using TECH2


How do you remove the rear seats in a Holden Commodore VZ Sedan?

10 pounds of c4 and a bit of imagination... i could almost cleantec it


Does the holden vz sv6 have paddle shifts?

The Holden VZ SV6 does not come with paddle shifters. This model, produced between 2004 and 2006, features a standard automatic transmission without the paddle shift option. Paddle shifters were more commonly found in later models or high-performance variants. If you're looking for a vehicle with paddle shifters, you may want to consider newer models in the Holden range.


How do you remove the window winder of your VZ commodore?

http://forums.justcommodores.com.au/holden-commodore-how-s/5541-removing-vt-vx-door-trim.html


What are the features of the Holden VZ Crewman?

Features of the Holden VZ Crewman include a new generation of Alloytec V6 engines, more high-output V8 power, V6 manual towing capacity up by 30 percent, cruise control standard across range as well as Electronic Brakeforce Distribution, Brake Assist and upgraded ABS.