no coil packs only control spark. more likely cause is head gasket blowed between the two cylinder. your welcome!
The 1991 Subaru Legacy has a 4 cylinder 2.2L engine
The 1993 Subaru Legacy 2.2 liter engine ignition timing is the sequence that allows the engine to run smoothly. The ignition timing is synchronized with the crankshaft position sensor.
subaru legacy engine is switched off when stop after drive
Theodore Roosevelt's legacy was to be the best president he could possibly be and to be honest, never lie, and to be loyal and trustworthy.
3 cylinders (Justy): 1-3-2 distributor rotor turns counter-clockwise 4 cylinders: (Loyale, XT) 1-3-2-4 distributor rotor turns counter-clockwise cylinder layout: 3 4 1 2 front of car 4 cylinders (Legacy) 1-3-2-4 distributor-less ignition coil pack terminal and cylinder layout: 3 4 1 2 front of car 6 cylinders (XT-6) 1-6-3-2-5-4 distributor rotor turns counter-clockwise cylinder layout: 5 6 3 4 1 2 front of car
Center of firewall. It is a black plastic box with 2 screws.
If you have no spark on the 1991 Subaru Legacy, you should check the spark plugs and spark plug wires for replacement. You should also check the battery and ignition for replacement.
forgetting to hook up the slip ignition wire
Turn the steering wheel back and forth if that doesn't work try that screw under the steering column
All fuses that run engine, ignition, and safety equipment is under hood, all other accessories is in the passenger compartment
the motor will bolt up, compression ratio will change unless you get a cometic head gasket that is matching for both.
check fuel pressure, also a weak ignition coil or fould plugs could cause hard starting