answersLogoWhite

0

P0133 is a trouble code for o2 sensor, what it means is 02 sensor slow response bank1, sensor 1 (before cat) should be located before the flex pipe. What causes this code is that there are many reasons, one could be a faulty sensor, a bad exhaust leak or minor usually happens if the leak is before the sensor depending on which leak is greater. vacuum leak can cause this code due to not enough oxygen entering the exhaust manifold. check with the dealer or local garage, it is very hard to actually state which problem is causing this code.

Mine was coming on due to a massive exhaust leak, when fixed the code disappeared.

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

Where is the OBD port on 1996 Hyundai Accent?

The 1996 Hyundai Accent OBD 2 port is on lower edge of dash next to kick panel


Where is the obd port on a 2000 Hyundai Accent?

The 2000 Hyundai Accent OBD 2 port is on rear of lower edge of dash; right of hood release


What does computer obd code po440 mean on a 2007 Hyundai accent?

P0440 = EVAP Emission Control System Malfunction.


Where is the obd connector on a 1997 accent?

The 1997 Hyundai Accent OBD 2 port is on lower edge of dash next to kick panel


Where is OBD Port located on a 2005 Hyundai Accent?

The 2005 Hyundai Accdent OBD 2 port is on lower left dash next to driver side kick panel


What does gm obd code po133?

O2 sensor CKT slow response (bank 1 sensor 1). Sounds like a tired B1S1 O2 sensor if all the connections are good.


What is the obd code for po133?

Slow response from an O2 sensor - could be fouled or in need of replacement. A possible source of fouling is from the use of an aftermarket air filter that has been oiled beyond the manufacturer's recommendation.


How do you get code off P0501 2008 Hyundai accent?

The P0501 code in a 2008 Hyundai Accent indicates a problem with the vehicle speed sensor (VSS) or its circuit. To resolve this, first check the VSS wiring and connectors for any damage or loose connections. If everything appears fine, test or replace the VSS itself. After repairs, clear the code using an OBD-II scanner and take the vehicle for a test drive to ensure the issue is resolved.


What does a 320 obd reading mean for a 2005 Hyundai Santa Fe?

0320 code


Where is the OBD connector on a 2001 accent?

The OBD-II connector on a 2001 Hyundai Accent is located underneath the dashboard, near the driver's side. You can typically find it just above the brake pedal, in the area where the steering column meets the dashboard. It may be necessary to kneel down or look under the dash to see it clearly.


Where is the OBD port on 1996 Accent?

The 1996 Hyuandi Accent OBD 2 port is on lower edge of dash next to kick panel


Where is the obd located on a 2004 Hyundai tiburon?

The 2004 Hyundai Tiburon OBD 2 port is behind fuse box door, left above hood release