0
What else can I help you with?
What does p0135 mean in obd system diagnostic trouble code for a 2003 Mitsubishi eclipse?
Trouble code P0135 means:O2 sensor heater circuit malfunction (Bank 1 Sensor 1)
What does p0135 mean in obd system diagnostic trouble code for a 2003 Ford Taurus?
Trouble code P0135 means:O2 sensor heater circuit malfunction (Bank 1 Sensor 1)
Need a obd adapter for 1992 Lexus es 300?
92 Lexus is OBD 1. There is a plug for Lexus OBD 1, and will not work with an OBD2 scanner.
What does p0135 mean in obd system diagnostic trouble code for a 1998 deville concourse?
It relates to and O2 sensor heater circuit failure. The ECU measures resistance through the heater wire, and if it breaks it will produce that code. Dirty or corroded contacts can also cause the fault.
What does obd code P0218 mean?
What does obd code P0740 mean
How do you fix obd code p0301 on Lexus rx300?
OBD code P0301 indicates a misfire in cylinder 1 of your Lexus RX300. To fix this issue, start by inspecting the spark plug and ignition coil for signs of wear or damage; replace them if necessary. Additionally, check for vacuum leaks, fuel injector problems, or compression issues in that cylinder. If these basic checks don’t resolve the issue, consider a more thorough diagnostic to identify underlying problems.
How do I get the obd readout?
plug a obd 2 code reader into your car and activate it.
Why won't my 94 Lexus link to my obd 2?
Your 1994 Lexus may not link to your OBD II scanner because it could be using the older OBD I system, which is not compatible with OBD II scanners. Additionally, the diagnostic connector could be faulty, or there might be issues with the vehicle's electronics or fuses. Check if your specific model requires an adapter or a different protocol. Ensure that the scanner is functioning properly by testing it on another vehicle.
What code reader was used on a 1996 Thunderbird?
OBD I, but for the most part, you can use OBD II
What is the code P0304?
OBD code P0304 is Cylinder Four Misfire.
Where is the OBD connector for 2000 Lexus rx300?
The OBD connector for a 2000 Lexus RX300 is located under the dashboard on the driver's side. You can find it near the steering column, typically above the brake pedal. It may be covered by a small panel or plastic cover that you can easily remove.
How do you fix 1997 Lexus es300 TRAC OFF warning light?
To fix the TRAC OFF warning light on a 1997 Lexus ES300, first, check the vehicle's fluid levels, particularly the brake fluid, as low levels can trigger the light. Next, inspect the TRAC system components, including the wheel speed sensors and the TRAC fuse, for any faults or damage. If the issue persists, use an OBD-II scanner to diagnose any error codes related to the traction control system, and address any identified problems. If you're unsure, consulting a professional mechanic is recommended for proper diagnosis and repair.
