I had a similar experience on my 57 Chevy back in the 60's.
1. CheckFuse Panel fuse under Brake Lights. 2. Check bulbs High Beam filaments. 3. Withrunning lights on tap tail lights to check for wire grounding shorts. 4. Check flasher to see that the lights work. 5. This is what I discovered to be wrong: Look under Brake Pedal for the Brake Relay Switch button. It works in reverse like the button on a refrigerator or vehicle door. When the button is pressed in by the brake pedal it opens the circuit to the High Beam of the brake/running tail lights. If working by hand but not by the brake adjust it. If not working replace it. It is the Brake Lights Relay Switch.
The brake lights in your 1983 Nissan pickup truck are controlled by the brake light relay switch. When the brake light relay switch malfunctions the brake lights will stop working.
Replace Alternator
i have tail lights but do not have brake lights nor do i have turn signals. i have replaced brake switch and all bulbs
If the vehicle is equipped with a trailer light plug, the wires for the brake lights and the turn signals have been connected together, which is common, as many trailers do not have separate lights for brakes and turn signals.
How do you remove rear brake drum from a 1993 Toyota pickup?
If there is no brake lights on a 1998 Mazda pickup, check the fuse. If the fuse has blown, the lights will not work.
How do you replace brake lights
are brake lights staying on or is brake in the dash on ?
To reset the ABS and brake lights on a 2002 Toyota MR2, trying disconnecting the battery for 10 minutes. A Toyota dealer can also reset the lights.
I am looking for the bulb number to replace a burnt out bulb on a 1991 Toyota pickup
It depends on the vehicle but in general you would have one fuse for the signals and one fuse for the brake lights.
Um... Aren't all brake lights in the back of a car?